Panasonic TH-103PF9UK / TH-103PF9EK Service Manual ▷ View online
6.2.3. Removal of Rear Cover ( C )
1. Remove screws (×19
) and then remove the Rear Cover
( C ).
Tighten the screw first in order of
Tighten the screw first in order of
and
when
mounting the Rear Cover C .
6.2.4. Removal of Rear Cover ( D )
1. Remove screws (×21
) and then remove the Rear Cover
( D ).
Tighten screw first in order of
Tighten screw first in order of
and
when mounting
the Rear cover D .
6.2.5. Removal of Rear Cover ( E )
1. Remove screws (×25
) and then remove the Rear Cover
( E ).
Tighten screw first in order of
Tighten screw first in order of
and
when mounting
the Rear cover E .
6.2.6. Removal of Rear Cover ( F )
Remove hooks and then remove 2 Covers.
(Note)
Be careful not to break the hooks.
1. Remove screws (×21
) and then remove the Rear Cover
( F ).
13
TH-103PF9UK / TH-103PF9EK
6.3. Removal of Side Angle (L), (R)
1. Remove Side Angle (L), (R) beforehand when remove the
following Boards.
Board name
Side Angle
SU-Board
Side Angle (R)
SM-Board
Side Angle (R)
SD-Board
Side Angle (R)
SC-Board
Side Angle (R)
C1-Board
Side Angle (R)
CZ-Board
Side Angle (R)
SS2-Board
Side Angle (L)
SS3-Board
Side Angle (L)
SS-Board
Side Angle (L)
C6-Board
Side Angle (L)
C7-Board
Side Angle (L)
6.3.1. Removal of Side Angle (L)
1. Remove 4 screws (G) of the Plate.
2. Remove 19 screws and then remove the Side Angle (L).
6.3.2. Removal of Side Angle (R)
1. Remove 4 screws and then remove the Customer Control
Unit.
2. Disconnect a connector (S34).
3. Remove 4 screws (F) of the Plate.
14
TH-103PF9UK / TH-103PF9EK
4. Remove 19 screws and then remove the Side Angle (R).
6.4. Removal of HA-Board
1. Remove 4 screws (H) and then pull HA-Terminal Block out
to forward.
2. Remove 4 screws (J) and remove Shield Plate.
3. Remove 2 screws (K) and then remove HA-Board.
3. Remove 2 screws (K) and then remove HA-Board.
6.5. Removal of HDD-Board
1. Remove 4 screws (L) and then pull HDD-Terminal Block out
to forward.
2. Remove 4 screws (M) and remove Shield Plate.
3. Remove 2 Hexagonal-Head screws (N) and then remove
3. Remove 2 Hexagonal-Head screws (N) and then remove
HDD-Board.
6.6. Removal of DS-Board
15
TH-103PF9UK / TH-103PF9EK
1. Disconnect the connectors (DS1, DS2, DS4, DS6, DS7,
DS8, DS9, DS10, DS14, DS15, DS30).
2. Remove 4 screws and then remove the Slot Block Case.
3. Remove 8 screws and then remove DS-Board.
6.7. Removal of HX-Board
1. Remove the HA Terminal Block and the HDD Terminal
Block.
(Refer to Removal of HA-Board and HDD-Board)
(Refer to Removal of HA-Board and HDD-Board)
2. Remove 4 screws and then remove the Slot Block Case.
(Refer to Removal of DS-Board)
3. Remove 4 Hexagonal-Head screws (P) and 2 screws on
HX-Board, and then remove HX-Board.
16
TH-103PF9UK / TH-103PF9EK
Click on the first or last page to see other TH-103PF9UK / TH-103PF9EK service manuals if exist.