Panasonic TH-103PF9UK / TH-103PF9EK Service Manual ▷ View online
5. Remove 26 screws ( ) (left and right side) and 18 screws
( ) (top and bottom side) and then remove the Fixed
Angles (A), (B), (C), (D).
Angles (A), (B), (C), (D).
6. Remove the Front Glass.
(Note)
· When removing the Front Glass from Escutcheon,
there is a risk of the glass center bending damage.
· Be sure to lift the instruction six positions of the
figure, when remove the Front Glass.
Note: When replacing the Front Glass
· The sponges for the Front Glass cannot be recycled.
· When replacing the Front Glass, use the new sponges.
· When replacing the Front Glass, use the new sponges.
6.44.2. Removal of Escutcheon (A)
1. Remove 9 screws ( ) and then remove the Fixed Angles
(A).
2. Remove each 5 screws ( ).
3. Remove each 2 screws ( ) and then remove the
3. Remove each 2 screws ( ) and then remove the
Connection Angles (A), (AS), (B), (BS).
37
TH-103PF9UK / TH-103PF9EK
6.44.3. Removal of Escutcheon (B)
1. Remove 9 screws ( ) and then remove the fixed Angles
(B).
2. Remove each 5 screws ( ).
3. Remove each 2 screws ( ) and then remove the
3. Remove each 2 screws ( ) and then remove the
Connection Angles (A), (AS), (B), (BS).
6.44.4. Removal of Escutcheon (C)
1. Remove 13 screws and then remove the fixed Angles (C).
2. Remove each 5 screws ( )
3. Remove each 2 screws ( ) and then remove the
3. Remove each 2 screws ( ) and then remove the
Connection Angles (A), (AS), (B), (BS).
38
TH-103PF9UK / TH-103PF9EK
6.44.5. Removal of Escutcheon (D)
1. Remove 13 screws and then remove the fixed Angles (D).
2. Remove each 5 screws ( ).
3. Remove each 2 screws ( ) and then remove the
3. Remove each 2 screws ( ) and then remove the
Connection Angles (A), (AS), (B), (BS).
6.45. Removal of V1-Board and V3-
Board
1. Remove 1 screw (T) and then remove V1-Board.
2. Remove 1 screw (U) and then remove V3-Board.
2. Remove 1 screw (U) and then remove V3-Board.
39
TH-103PF9UK / TH-103PF9EK
7 Removal of Plasma Panel
1. Remove the Rear Covers.
(Refer to Removal of Rear Cover.)
2. Remove 4 screws and then remove the Customer Control
Unit.
3. Disconnect a connector (S34).
4. Disconnect a connector (DS15).
5. Remove 36 screws and then remove Escuchon with front
5. Remove 36 screws and then remove Escuchon with front
glass.
(Refer to Removal of Escutcheon.)
(Refer to Removal of Escutcheon.)
6. Remove 4 screws (F) of the Plate.
7. Remove 4 screws ( ) and then remove the Angles.
8. Remove each 3 screws ( ) and then remove the Rear
8. Remove each 3 screws ( ) and then remove the Rear
Cover Angle (B), (C).
9. Disconnect the each Fan relay connectors.
· Remove each 2 screws and then remove the Fan
Blocks (A), (B).
· Remove each 4 screws and then remove the Fan
Blocks (C), (D), (E), (F), (G), (H), (J), (K).
10. Disconnect the connectors (D3, D5, D20, D25).
11. Remove the flexible cables from the connectors (D31, D32,
11. Remove the flexible cables from the connectors (D31, D32,
D33, D34, D35, D36).
12. Remove each 4 screws ( ) and then remove the Core
40
TH-103PF9UK / TH-103PF9EK
Click on the first or last page to see other TH-103PF9UK / TH-103PF9EK service manuals if exist.