Panasonic TH-103PF10WK / TH-103PF10TK / TH-103PF10RK Service Manual ▷ View online
TH-103PF10WK/TK/RK
49
(Note)
• When removing the Cabinet with Front Glass, take
care not to damage the flexible cable of the Plasma
Panel circumference.
Panel circumference.
5. Remove 26 screws ( ) (left and right side) and 18
screws ( ) (top and bottom side) and then remove the
Fixed Angles (A), (B), (C), (D).
Fixed Angles (A), (B), (C), (D).
6. Remove the Front Glass.
(Note)
• When removing the Front Glass from Cabinet, there is a
risk of the glass center bending damage.
• Be sure to lift the instruction six positions of the figure,
when remove the Front Glass.
Note: When replacing the Front Glass
• The sponges for the Front Glass cannot be recycled.
• When replacing the Front Glass, use the new sponges.
• When replacing the Front Glass, use the new sponges.
TH-103PF10WK/TK/RK
50
7.44.2.
Removal of Cabinet
1. Remove the Front Glass.
(Refer to Removal of Front Glass.)
7.44.2.1. Removeval of Cabinet Top
1. Remove each 5 screws ( ).
2. Remove each 2 screws ( ) and then remove the Con-
2. Remove each 2 screws ( ) and then remove the Con-
nection Angles (A), (AS), (B), (BS).
3. Remove the Cabinet Top.
7.44.2.2. Removeval of Cabinet Bottom
1. Remove each 5 screws ( )
2. Remove each 2 screws ( ) and then remove the Con-
2. Remove each 2 screws ( ) and then remove the Con-
nection Angles (A), (AS), (B), (BS).
3. Remove the Cabinet Bottom.
7.44.2.3. Removeval of Cabinet Right
1. Remove each 5 screws ( ).
2. Remove each 2 screws ( ) and then remove the Con-
2. Remove each 2 screws ( ) and then remove the Con-
nection Angles (A), (AS), (B), (BS).
3. Remove the Cabinet Right.
TH-103PF10WK/TK/RK
51
7.44.2.4. Removeval of Cabinet Left
1. Remove each 5 screws ( ).
2. Remove each 2 screws ( ) and then remove the Con-
2. Remove each 2 screws ( ) and then remove the Con-
nection Angles (A), (AS), (B), (BS).
3. Remove the Cabinet Left.
7.45. Removal of V1-Board and V3-
Board
1. Remove the Cabinet.
(Refer to Removal of Cabinet.)
2. Disconnect the connectors (V1).
3. Remove 1 screw (N) and then remove V1-Board.
4. Disconnect the connectors (V).
5. Remove 1 screw (P) and then remove V3-Board.
3. Remove 1 screw (N) and then remove V1-Board.
4. Disconnect the connectors (V).
5. Remove 1 screw (P) and then remove V3-Board.
7.46. Removal of Plasma Panel
1. Remove the Rear Covers.
(Refer to Removal of Rear Cover.)
2. Disconnect the connectors (DS15, SC34).
3. Remove 4 screws and then remove the Side Power Unit.
4. Remove 44 screws and then remove cabinet with front
glass.
(Refer to Removal of Cabinet.)
(Refer to Removal of Cabinet.)
TH-103PF10WK/TK/RK
52
5. Remove 4 screws (Q) of the Plate.
6. Remove 3 Eye Bolts.
7. Remove 6 Eye Bolt Covers.
7. Remove 6 Eye Bolt Covers.
8. Remove 4 screws ( ) and then remove the Rear Cover
Angles(G),(H).
9. Remove 6 screws ( ) and then remove the Rear Cover
Angle (C), (D).
10. Disconnect the each Fan relay connectors.
• Remove each 4 screws and then remove the Fan Blocks
(A), (B), (E), (F), (G), (H), (J).
• Remove each 4 screws and then remove the Fan (C).
• Remove each 3 screws and then remove the Fan
• Remove each 3 screws and then remove the Fan
(D),(K).
11. Disconnect the connectors (D3, D5, D20, D25).
12. Remove the flexible cables from the connectors (D31,
D32, D33, D34, D35, D36).
13. Remove 8 screws ( ) and then remove the Core Holder
(upper), (bottom).
14. Remove 4 screws ( ) and then remove D-Board.
Click on the first or last page to see other TH-103PF10WK / TH-103PF10TK / TH-103PF10RK service manuals if exist.