Panasonic TH-103PF10WK / TH-103PF10TK / TH-103PF10RK Service Manual ▷ View online
TH-103PF10WK/TK/RK
45
5. Remove 6 screws ( ) and then remove the Reinforce-
ment Angle (B).
6. Remove 6 screws of the flexible cable.
7. Remove the flexible cables from the connectors (CB3,
7. Remove the flexible cables from the connectors (CB3,
CB4, CB5, CY0, CY1, CY3).
8. Disconnect the connectors (CY2, CY4).
9. Remove 6 screws and then remove CY-Board.
7.37. Removal of CZ-Board
1. Remove the Reinforcement Angle (B).
(Refer to Removal of CY-Board)
2. Remove 4 screws of the flexible cable.
3. Disconnect the connector (CZ4).
3. Disconnect the connector (CZ4).
4. Remove the flexible cables from the connectors (CB1,
CB2, CZ1).
5. Remove 4 screws and then remove CZ-Board.
7.38. Removal of DR1-Board (A)
1. Disconnect the Fan relay connectors.
2. Remove 4 screws and then remove the Fan Block (B).
2. Remove 4 screws and then remove the Fan Block (B).
3. Disconnect the connectors (DR1, DR2, DR3, DR4, DR5).
4. Remove 5 screws and then remove the DR1-Board (A).
4. Remove 5 screws and then remove the DR1-Board (A).
TH-103PF10WK/TK/RK
46
7.39. Removal of DR1-Board (B)
Attaching short jumper to connector (DR6).
Attach Short Jumper to the connector (DR6) when replacing
DR1-Board.
DR1-Board.
1. Disconnect the connectors (DR1, DR2, DR3, DR4, DR5).
2. Remove 5 screws and then remove DR1-Board (B).
3. Remove Short Jumper attaching to the connector (DR6)
2. Remove 5 screws and then remove DR1-Board (B).
3. Remove Short Jumper attaching to the connector (DR6)
on DR1-Board you removed and attach it to the connector
(DR6).
(DR6).
7.40. Removal of DR2-Board (A)
1. Disconnect the connectors (DR11, DR12, DR13, DR14,
DR15).
2. Remove 5 screws and then remove DR2-Board (A).
7.41. Removal of DR2-Board (B)
Attaching short jumper to connector (DR16).
Attach Short Jumper to the connector (DR16) when replacing
DR2-Board.
DR2-Board.
1. Remove 4 screws and then remove Fan Block (E).
2. Disconnect the connectors (DR11, DR12, DR13, DR14,
DR15).
3. Remove 5 screws and then remove DR2-Board (B).
4. Remove Short Jumper attaching to the connector (DR16)
4. Remove Short Jumper attaching to the connector (DR16)
on DR2-Board you removed and attach it to the connector
(DR16).
(DR16).
TH-103PF10WK/TK/RK
47
7.42. Removal of CD-Board
7.42.1. Removal of CD-Board (A)
1. Remove the flexible cables from the connectors (CD1,
CD2).
2. Remove 2 screws and then remove CD-Board (A).
7.42.2. Removal of CD-Board (B)
1. Remove the flexible cables from the connectors (CD1,
CD2).
2. Remove 2 screws and then remove CD-Board (B).
7.42.3. Removal of CD-Board (C)
1. Remove the flexible cables from the connectors (CD1,
CD2).
2. Remove 2 screws and then remove CD-Board (C).
7.42.4. Removal of CD-Board (D)
1. Remove the Fan Block (H).
(Refer to Removal of the Fan)
2. Remove the flexible cables from the connectors (CD1,
CD2).
3. Remove 2 screws and then remove CD-Board (D).
7.42.5. Removal of CD-Board (E)
1. Remove 2 screws and then remove the Rear Cover Angle
(H).
TH-103PF10WK/TK/RK
48
2. Remove the flexible cables from the connectors (CD1,
CD2).
3. Remove 2 screws and then remove CD-Board (E).
7.42.6. Removal of CD-Board (F)
1. Remove the Fan Block (J).
(Refer to Removal of Fan)
2. Remove the flexible cables from the connectors (CD1,
CD2).
3. Remove 2 screws and then remove CD-Board (F).
7.43. Removal of AC Inlet
1. Remove 2 screws and then remove the AC Inlet Cover.
2. Disconnect a connector (F1).
3. Remove 3 screws and then remove the AC-Inlet.
3. Remove 3 screws and then remove the AC-Inlet.
7.44. Removal of Cabinet and Front
Glass
7.44.1. Removal of Front Glass
1. Disconnect the connectors (DS15, SC34).
2. Remove 4 screws, and then side the Side Power Unit
upward.
3. Remode the side Power Unit.
4. Remove 44 screws and then remove cabinet with front
glass.
Click on the first or last page to see other TH-103PF10WK / TH-103PF10TK / TH-103PF10RK service manuals if exist.