Panasonic CF-Y4HWPZZ Service Manual ▷ View online
2.3.12. Line processing of DC-IN Cable
Shild film
1. Shild film wrapped
around the DC-IN cable.
around the DC-IN cable.
10
3mm
DC-IN Jack
2. Wrap the tape on Shild film.
Cover all Shild film with the tape.
Speaker Cable
DC-IN
DC-IN Cable
Tape
2.3.13. The order of tightening screw of PCMCIA Slot
Screw A
Screw D
Cord Bus
Connector
Connector
Screw B
Screw C
The order of tightening screws: A
B
C
D
2-17
2.3.14. The order of tightening screws of Drive Unit
Screw A
Screw C
Drive Unit
Be careful not to pinch when
you arrange the drive unit.
Bend and stay up.
The order of tightening screws: A
B
C
Screw B
The drive unit must draw in the
direction of the arrow and stop
the screw.
direction of the arrow and stop
the screw.
2.3.15. Drive FPC processing
Peel off the Both sides tape
flaking off paper,
turn the sheet and put on FPC.
flaking off paper,
turn the sheet and put on FPC.
The space between
the shutter and FPC
is 0.5mm or more.
the shutter and FPC
is 0.5mm or more.
Sheet
2-18
2.3.16. Line processing of LCD Cable
Take care not to pinch the cables!
Above the hinge: Inverter Cable
Below the hinge: LCD Cable
Below the hinge: LCD Cable
Pass the cable under the hinge
Align the holes
and adhere
and adhere
LCD Cable
Inverter
Cable
Cable
2.3.17. Affixation specification of Disk Protecting (B)
Match a round hole to the edge of the cushion
1mm.
Disk Protect(B)
Put between
a round hole
and externals
edge.
a round hole
and externals
edge.
K/B Disk Angle
Disk side
2-19
2.3.18. Assembly of keyboard unit
Part A heat spreader grease(1)
<Made by Shin-Etsu Silicones G-751>
<Made by Shin-Etsu Silicones G-751>
Part B Heat spreader
grease(2)
<Made by Shin-Etsu
Silicones G-746>
grease(2)
<Made by Shin-Etsu
Silicones G-746>
Keyboard heat spreader seat
KeyBoard
Heat spreader plate
Heat spreader angle
Insert according to
the ditch of a top case.
the ditch of a top case.
D
C
Rib
Both side tape
1. When making repairs, be absolutely sure to re-apply the heatreleasing grease (1) < G-751 > on part A (using an amount equivalent to
the size of a pea), and insert according to the ditch of a top case.
2. Put the keyboard heat spreader sheet by part D rib application after inserting part C rib.
3. Spread heat spreader grease (2) < G-746 > on the whole of part B in the proper quantity when repairing, and make keyboard heat
spreader sheet, heat spreader angle and heat spreader plate stick.
4. Fix the keyboard unit surely the hook 4 place of the LCD side, and the hook 1 place of each of right and left and both side tape has
been put on Top Case.
the size of a pea), and insert according to the ditch of a top case.
2. Put the keyboard heat spreader sheet by part D rib application after inserting part C rib.
3. Spread heat spreader grease (2) < G-746 > on the whole of part B in the proper quantity when repairing, and make keyboard heat
spreader sheet, heat spreader angle and heat spreader plate stick.
4. Fix the keyboard unit surely the hook 4 place of the LCD side, and the hook 1 place of each of right and left and both side tape has
been put on Top Case.
Hook
2-20
Click on the first or last page to see other CF-Y4HWPZZ service manuals if exist.