Panasonic CF-29N3LGZBM Service Manual ▷ View online
7-7
7.1.15. Removing the Palm Top Cover
Sheet, Palm Top Cover, Touch Pad
Adhesion Seat, Touch Pad, Touch
Pad SW Knob, LED PCB and SW
LED PCB
Adhesion Seat, Touch Pad, Touch
Pad SW Knob, LED PCB and SW
LED PCB
Figure 14
1. Remove the Palm Top Cover Sheet.
2. Remove the five Screws<e>, and remove Palm Top
2. Remove the five Screws<e>, and remove Palm Top
Cover.
3. Remove the Touch Pad Adhesion Seat.
4. Remove the Touch Pad.
5. Remove the Touch Pad SW Knob and Touch Pad SW
4. Remove the Touch Pad.
5. Remove the Touch Pad SW Knob and Touch Pad SW
Knob In.
6. Remove the LED PCB.
7. Remove the PW LED Sheet.
8. Remove the Screw<f>, and remove the SW LCD PCB.
7. Remove the PW LED Sheet.
8. Remove the Screw<f>, and remove the SW LCD PCB.
Screws <e>: DRHM0002ZA
Screw <f>:
Screw <f>:
DRHM0002ZA
7.1.16. Removing the Handle and Power
SW
Figure 15
1. Remove the two Screws<g>, and remove Handle Base
L,R.
2. Remove the Handle.
3. Remove the Power SW.
3. Remove the Power SW.
Screws <g>: DRSB4+8FKL
Palm Top Cover Sheet
<e>
<e>
<e>
<e>
<f>
Palm Top Cover
PW LED Sheet
Touch Pad Adhesion Seat
Touch Pad
LED PCB
Touch Pad SW Knob
Touch Pad
SW Knob In
PW LED
PCB
SW LED
PCB
<e>
Handle
Handle Base L
Handle Base R
<g>
<g>
Power
SW
7-8
7.1.17. Removing LCD Unit
Figure 16
1. Remove the two Screws<h> and the four Screws<i>, and
remove the LCD Unit.
Screws <h>: DXSB4+12FNLB
Screws <i>: DXYN4+J8FNL
Screws <i>: DXYN4+J8FNL
7.1.18. Removing LCD Rear Cabinet, Hinge
L and Hinge R
Figure 17
1. Remove the two Screws<j> and the twelve Screws<k>,
and remove the LCD Rear Cabinet.
2. Remove the LCD Latch.
3. Remove the two Screws<l>, and remove the Hinge L and
3. Remove the two Screws<l>, and remove the Hinge L and
R.
Screws <j>: DRSB4+10FKL
Screws <k>: DRSB26+8HKL
Screws <l>: DRHM0062ZA
Screws <k>: DRSB26+8HKL
Screws <l>: DRHM0062ZA
<i>
<i>
<h>
<i>
<i>
<h>
LCD unit
<k>
<l>
<l>
<j>
<k>
<k>
<j>
<k>
<k>
<k>
<k>
<k>
<k>
<k>
<k>
<k>
LCD Latch
LCD Rear Cabinet
LCD Front Cabinet
Hinge L
Hinge R
7-9
7.1.19. Removing the Inverter PCB, TS
PCB and LCD Unit
Figure 18
1. Disconnect two Cables from Connectors. (on Inverter
PCB)
2. Remove the Inverter PCB.
3. Disconnect two Cables from Connectors. (on TS PCB)
4. Remove the TS PCB.
5. Remove the LCD Unit.
3. Disconnect two Cables from Connectors. (on TS PCB)
4. Remove the TS PCB.
5. Remove the LCD Unit.
7.1.20. Removing the Antenna PCB L and
R
Figure 19
1. Remove the four Screws<m>.
2. Remove the Antenna PCB Cover L and R and Antenna
2. Remove the Antenna PCB Cover L and R and Antenna
PCB L and R.
Screws <m>: DRSB26+8KL
LCD Unit
LCD Front Cabinet
Inverter PCB
TS PCB
<m>
<m>
<m>
<m>
LCD Rear Cabinet Ass’y
Antenna PCB R
Antenna PCB L
Antenna PCB Cover R
Antenna PCB Cover L
7-10
7.2.
Reassembly Instructions
7.2.1.
Attention when CF-
29 series is repaired
• Please execute writing BIOS ID when you exchange the Main Board.
• You cannot reuse the Conductive Clothes and the heat dissipating parts such as Sheet and Rubber. Use new parts.
• You cannot reuse the Conductive Clothes and the heat dissipating parts such as Sheet and Rubber. Use new parts.
7.2.2.
Setting the Antenna PCB L and R
1. Set the Antenna PCB L and R to the LCD Rear Cabinet
Ass’y.
2. Fix the Antenna PCB Cover L and R using the four
Screws. <i>
Screws <m>: DRSB26+8KL
n
Arranging the Antenna L and R Cables
<m>
<m>
<m>
<m>
LCD Rear Cabinet Ass’y
Antenna PCB R
Antenna PCB L
Antenna PCB Cover R
Antenna PCB
Cover L
View "A"
View "A"
LCD Rear
Cabinet
Cabinet
<No good>
Antenna
Cable
Cable
Antenna Cable R
Tape
Cable Clamper
LCD Rear
Cabinet
Cabinet
Waterproof
Cushion
Cushion
Antenna Cable
L and R
L and R
Bend
Antenna Cable R
Antenna Cable L
LCD Rear Cabinet
Tape
Tape
1~5mm
1~4mm
1~4mm
1~5mm
align
View "E"
View "D"
Pass the Antenna Cable
through this space.
through this space.
Antenna Cable L
Tape
align
View "C"
Pass the Antenna
Cable through this
space.
Cable through this
space.
Do not press too
much the
Waterproof Cap.
much the
Waterproof Cap.
Cable Clamper
Waterproof Cushion
Cushion
Tape
Tape
Tape
Tape
View "B"
View "C"
View "C"
View "B"
Antenna Cable L
Antenna Cable R
View "E"
View "D"
View "B"
View "A"
Click on the first or last page to see other CF-29N3LGZBM service manuals if exist.