Panasonic KX-UT113RU / KX-UT113RU-B / KX-UT123RU / KX-UT123RU-B (serv.man3) Service Manual ▷ View online
29
KX-UT113RU/KX-UT113RU-B/KX-UT123RU/KX-UT123RU-B
Table-2
Table-3
Note:
Refer to waveform (3) in Waveform (P.70) .
No.2
No Power(VCC DSP:+3.3V) Error
[Check Points]
Measure the voltage at C564(Between VCC DSP and DG).
Is it 3.3V?
Is it 3.3V?
[Related Parts]
DL501(VCC DSP), C564, C531, C533, C534, C549
Recheck 9.1.1 or 9.1.2.(Power Supply)
Recheck 9.1.1 or 9.1.2.(Power Supply)
[Related Circuit]
No. 3,4,5,7,9
Flash ROM Data Error / DSP ROM Data Error
[Check Points]
Measure the SCLK signal at Pin 16 of IC504.
Is it 6.25MHz?
See the communication waveform (3).*
Is it 6.25MHz?
See the communication waveform (3).*
[Related Parts]
R562,L515(SCLK),IC504,R511,C528,C569,R597,R596,
R521,R543
R521,R543
[Related Circuit]
30
KX-UT113RU/KX-UT113RU-B/KX-UT123RU/KX-UT123RU-B
Table-4
Note:
Refer to waveform (5) in Waveform (P.70) .
No. 6
SDRAM Data Error
[Check Points]
Measure the SDCLK signal at Pin 38 of IC503.
Is it 64MHz?
See the communication waveform (5).*
Is it 64MHz?
See the communication waveform (5).*
[Related Parts]
R567,L501(SDCLK),IC501,IC503,R508,R516,R517,R520,R538,R546,R556,R557,R567,L501,
RA501-RA508,RA521,RA522
C513-C519,C524-C527,C578(Between 3.3V and DG)
RA501-RA508,RA521,RA522
C513-C519,C524-C527,C578(Between 3.3V and DG)
[Related Circuit]
31
KX-UT113RU/KX-UT113RU-B/KX-UT123RU/KX-UT123RU-B
Table-5
No. 8
ASIC Data Error
[Check Points]
Measure the ASICCLK signal at Pin 1 of IC205(Ope PCB).
Flat Cable(Between Main PCB and Ope PCB)
For details to 9.3.1 ASIC Data Error. (P.34)
Flat Cable(Between Main PCB and Ope PCB)
For details to 9.3.1 ASIC Data Error. (P.34)
[Related Parts]
CN101,L111,L113,L114,L116,L117,C136,R524,R537,R544,L504,R550
(Main PCB),CN205,IC205,L211(Ope PCB),
Flat Cable(Between Main PCB and Ope PCB)
(Main PCB),CN205,IC205,L211(Ope PCB),
Flat Cable(Between Main PCB and Ope PCB)
[Related Circuit]
32
KX-UT113RU/KX-UT113RU-B/KX-UT123RU/KX-UT123RU-B
Table-6
No. 10
PHY Data Error
[Check Points]
Measure the ECLK signal at TP MAINOSC.
Flat Cable(Between Main PCB and Ope PCB)
For details to 9.7.1 PHY Data Error. (P.38)
Flat Cable(Between Main PCB and Ope PCB)
For details to 9.7.1 PHY Data Error. (P.38)
[Related Parts]
IC401, IC501, X501, R552-R554, L502
R401, R402, R403, R405, R406, R410, RA403, RA511, R506,L401-L404, L407, L414, C415,
R542, L513
R401, R402, R403, R405, R406, R410, RA403, RA511, R506,L401-L404, L407, L414, C415,
R542, L513
[Related Circuit]
Click on the first or last page to see other KX-UT113RU / KX-UT113RU-B / KX-UT123RU / KX-UT123RU-B (serv.man3) service manuals if exist.