Panasonic KX-TDA6382X / KX-TDA6382SX Service Manual ▷ View online
21
KX-TDA6382X/KX-TDA6382SX
5.2.
Instlling/Removing the Optional Service Cards
Slot Condition
Caution:
To protect the back board from static electricity, do not touch parts on the back board in the main unit and on the optional service
cards.To discharge static, touch ground or wear an earthing strap.
cards.To discharge static, touch ground or wear an earthing strap.
ELCOT16 Card
Function
16-port analogue trunk card with CallerID function and 4 power failure transfer (PFT) ports.
Accessories and User-supplied Items
Accessories (included): Screws X 2
User-supplied (not included): Amphenol connector
Notes:
•To connect the amphenol connector, refer to " Fastening Amphenol Type Connector ".
•For details about power failure transfer, refer to " Power Failure Connections ".
•For details about power failure transfer, refer to " Power Failure Connections ".
•To confirm the trunk connection, refer to "Confirming the Trunk Connection" in " Starting the PBX ".
Card Type
Slot Type
KX-TDA600 / KX-TDE600
KX-TDA620 / KX-TDE620
Free 1-10
EMPR
BUS-M
Free 1-11
BUS-S
EMPR Card
No
Yes
No
No
No
BUS-M Card
No
No
Yes
No
No
BUS-S Card
No
No
No
No
Yes
Trunk Cards
Yes
No
No
Yes
No
Extension Cards
Yes
No
No
Yes
No
OPB3 Card
Yes
No
No
Yes
No
CTI-LINK Card
Yes
No
No
No
No
EECHO Card
Yes
No
No
Yes
No
Amphenol
To trunk
LED
22
KX-TDA6382X/KX-TDA6382SX
Pin Assignments
Amphenol Connector
LED Indications
No.
Signal Name
Function
No.
Signal Name
Function
1
RA
Ring port 1
26
TA
Tip port 1
2
RB
Ring port 2
27
TB
Tip port 2
3
RC
Ring port 3
28
TC
Tip port 3
4
RD
Ring port 4
29
TD
Tip port 4
5
RE
Ring port 5
30
TE
Tip port 5
6
RF
Ring port 6
31
TF
Tip port 6
7
RG
Ring port 7
32
TG
Tip port 7
8
RH
Ring port 8
33
TH
Tip port 8
9
RI
Ring port 9
34
TI
Tip port 9
10
RJ
Ring port 10
35
TJ
Tip port 10
11
RK
Ring port 11
36
TK
Tip port 11
12
RL
Ring port 12
37
TL
Tip port 12
13
RM
Ring port 13
38
TM
Tip port 13
14
RN
Ring port 14
39
TN
Tip port 14
15
RO
Ring port 15
40
TO
Tip port 15
16
RP
Ring port 16
41
TP
Tip port 16
17-25
Reserved
-
42-50
Reserved
-
Indication
Color
Description
CARD STATUS
Green/Red
Card status indication
OFF: Power Off
Green ON: Normal (all ports are idle)
Green Flashing (60 times per minute): Normal (a port is in use)
Red ON: Fault (includes reset)
Red Flashing (60 times per minute): Out of Service
OFF: Power Off
Green ON: Normal (all ports are idle)
Green Flashing (60 times per minute): Normal (a port is in use)
Red ON: Fault (includes reset)
Red Flashing (60 times per minute): Out of Service
23
KX-TDA6382X/KX-TDA6382SX
Fastening Amphenol Connector
An amphenol 57JE type connector is used on some of the optional service cards.
To connect an Amphenol connector, use the spring latch or screw to fix the upper part and use Velcro tape to fix the lower part
of the connector.
of the connector.
24
KX-TDA6382X/KX-TDA6382SX
Using Analogue Trunk Card and Extension Card
Power Failure Connection connects a specific SLT and a trunk in the event of power failure. The following analogue trunk
and extension cards can be used for Power Failure Connections:
and extension cards can be used for Power Failure Connections:
• Analog trunk card: ELCOT16 (4 PFT ports)
• Extension cards: EMSLC16/EMSLC24/ESLC16/ESLC24 (4 PFT ports), ESLC16/CSLC16/DHLC8/SLC8(2 PFT ports)
• Extension cards: EMSLC16/EMSLC24/ESLC16/ESLC24 (4 PFT ports), ESLC16/CSLC16/DHLC8/SLC8(2 PFT ports)
To 1 analogue trunk card, connect only 1 extension card.
Note:
• Power Failure Connections must be made within the same shelf.
• By programming the Hybrid IP-PBX, a trunk conversation established during power failure can be maintained even when the
• By programming the Hybrid IP-PBX, a trunk conversation established during power failure can be maintained even when the
power returns and the connection is switched back to the normal maintained even when the power returns and the connection is
switched back to the normal performed, the connection will be dropped when power returns.
switched back to the normal performed, the connection will be dropped when power returns.
Accessory and User-supplied Items
Accessory (included): none
User-supplied (not included): RJ11 connectors
User-supplied (not included): RJ11 connectors
Click on the first or last page to see other KX-TDA6382X / KX-TDA6382SX service manuals if exist.