Panasonic KX-NT700RU Service Manual ▷ View online
37
KX-NT700RU
7.5.
LCD Trouble
* Refer to “10.3. Waveform”.
38
KX-NT700RU
7.6.
Speaker and Microphone Trouble
Recommended connection diagram is shown below.
If IP is not displayed on the LCD after connecting two KX-NT700RU units together with a LAN cable, please refer to “7.7. LAN port
Trouble”.
When the sending/receiving call cannot be made upon the connection with TEL, please refer to “7.10. TEL Line Trouble”.
If IP is not displayed on the LCD after connecting two KX-NT700RU units together with a LAN cable, please refer to “7.7. LAN port
Trouble”.
When the sending/receiving call cannot be made upon the connection with TEL, please refer to “7.10. TEL Line Trouble”.
7.6.1.
SP Phone Reception (from LAN, TEL, or Audio to Speaker)
7.6.2.
SP Phone Transmission (form MIC to LAN, TEL, or Audio)
7.6.2.1.
MIC1_inside
39
KX-NT700RU
7.6.2.2.
MIC1_outside
7.6.2.3.
MIC2_inside
7.6.2.4.
MIC2_outside
7.6.2.5.
MIC3_inside
40
KX-NT700RU
7.6.2.6.
MIC3_outside
7.6.2.7.
MIC4_inside
7.6.2.8.
MIC4_outside
*PCM bath wave form between VoIP (IC101)-DSP (IC201) is shown in (15), and the one between DSP (IC201)-CPLD (IC208) is in
(16). Refer to “10.3. Waveform”.
(16). Refer to “10.3. Waveform”.
Click on the first or last page to see other KX-NT700RU service manuals if exist.