Panasonic KX-NT700RU Service Manual ▷ View online
33
KX-NT700RU
34
KX-NT700RU
7.3.
Port Output
In case that the red LEDs are lighted and nothing is displayed on the LCD after power on the unit, a hardware error is being
detected.
The error content is output in the below Test Point. It is possible to check using the tester, without opening the housing.
detected.
The error content is output in the below Test Point. It is possible to check using the tester, without opening the housing.
Remarks: 0=0V, 1=3.3V
Handling (A): Check the soldering. Resolder or replace parts as needed.
Handling (B): Check the soldering. Resolder parts or replace the PCB assembly as needed.
Handling (A): Check the soldering. Resolder or replace parts as needed.
Handling (B): Check the soldering. Resolder parts or replace the PCB assembly as needed.
35
KX-NT700RU
7.4.
No Operation
7.4.1.
Power Supply: AC adaptor
7.4.2.
Power Supply: PoE Hub
36
KX-NT700RU
*Each IC102 has its own MAC address.
When replacing the IC102, remove the former MAC address label from the bottom of the unit and affix the included label which
indicates the new MAC address.
indicates the new MAC address.
* Refer to “10.3. Waveform”.
Click on the first or last page to see other KX-NT700RU service manuals if exist.