Panasonic KX-NT680RU-B Service Manual ▷ View online
37
KX-NT680 Series
9.8.
Ethernet Does Not work
9.8.1.
L2SW Data error
Note:
Refer to waveform (26),(27) in Waveform (P.56) .
Check the soldering.
Resolder or replace parts as needed.
Measure the voltage at Pin.
TP:L2_VDDH,L2_VDDP,L2_VDDR,L2_VDDA
Is it 3.3V?
TP:L2_VDDH,L2_VDDP,L2_VDDR,L2_VDDA
Is it 3.3V?
Measure the voltage at Pin.
TP:L2_VDDL,L2_VDDS,L2_VDD
Is it 1.1V?
TP:L2_VDDL,L2_VDDS,L2_VDD
Is it 1.1V?
Measure 25MOUT signal at Pin B22 of IC2001.
Is it 25MHz?
See the communication waveform(26)*.
See the communication waveform(26)*.
Confirm the waveform(MDIO/MDCLK)
See the communication waveform(27)*.
See the communication waveform(27)*.
Yes
Yes
Related parts:
Related parts:
R3027,L2001,L2002,L2003,L2005,
C2003,C2004,C2006,C2008,C2010,
C2011,C2014,C2015,C2018-C2020,
C2022,C2015-C2027,C2029,
C2032-C2034,C2036
C2003,C2004,C2006,C2008,C2010,
C2011,C2014,C2015,C2018-C2020,
C2022,C2015-C2027,C2029,
C2032-C2034,C2036
L2004,L2006,L2007,C2005,C2007,
C2009,C2012,C2013,C2016,C2017,
C2021,C2023,C2024,C2028,C2030,
C2031,C2035,C2037,C2038
C2009,C2012,C2013,C2016,C2017,
C2021,C2023,C2024,C2028,C2030,
C2031,C2035,C2037,C2038
Related parts: IC1001,L1006,R1046,C1039
Related parts: IC1001,IC2001,R1065,R1066,R2017,
R2018
R2018
Yes
Are Ethernet communication interfaces available?
Related parts: Switching HUB,Ethernet Cable
See 9.8.2 LAN port.
See 9.8.3 PC port.
See 9.8.3 PC port.
Yes
END
No
No
Confirm the PHY_RST signal.
the L2SW reset signal(PHY_RST) is released
(HI level)?
the L2SW reset signal(PHY_RST) is released
(HI level)?
Yes
Related parts: R1018,C2001,IC1001
No
No
No
No
Yes
38
KX-NT680 Series
9.8.2.
LAN port
Note:
Refer to waveform (28) - (33) in Waveform (P.56) .
9.8.3.
PC port
Note:
Refer to waveform (28) - (33) in Waveform (P.56,P.57) .
Check the soldering.
Resolder or replace parts as needed.
Confirm the waveform Pin 1-8 of JK2002.
See the communication waveform(31),(32),(33)*.
See the communication waveform(31),(32),(33)*.
Related parts: IC2001,T2002,C2045
END
No
Yes
Confirm the waveform Pin 1-12 of T2002.
See the communication waveform(28),(29),(30)*.
See the communication waveform(28),(29),(30)*.
Related parts: JK2002,L2009-L2012,R2047,
R2048,R2037,R2039,R2042,
R2044,C2055,C2057,C2061,
C2062
R2044,C2055,C2057,C2061,
C2062
No
Yes
Check the soldering.
Resolder or replace parts as needed.
Confirm the waveform Pin 1-8 of JK2001.
See the communication waveform(31),(32),(33)*.
See the communication waveform(31),(32),(33)*.
Related parts: IC2001,T2001,C2044,D2001
END
No
Yes
Confirm the waveform Pin 1-12 of T2001.
See the communication waveform(28),(29),(30)*.
See the communication waveform(28),(29),(30)*.
Related parts: JK2001,R2035,R2036,R2038,
R2041,C2056
No
Yes
39
KX-NT680 Series
9.9.
LCD back light and LED Not Light
Note:
Refer to waveform (34) in Waveform (P.57) .
Check the soldering.
Resolder or replace parts as needed.
Does RINGER LED light?
Related parts:
No
Yes
Related parts:
No
Yes
Key LED light?
LCD Backlight LED light?
See the communication waveform(34)*.
See the communication waveform(34)*.
No
END
Related parts:
IC1001,Q1001,Q1002,LED cable
(Ringer PCB)
R6001,R6002,D6001,D6014
(Ringer PCB)
R6001,R6002,D6001,D6014
IC1001,R4040,IC3005,R3017,
R3020-R3023,D3004,L3005,
C3067,C3068,C3071-C3073,
LCD Module
R3020-R3023,D3004,L3005,
C3067,C3068,C3071-C3073,
LCD Module
IC1001,R6003-R6008,D6002-D6007
Yes
*Please refer to 10.4 Assembly for Lead wire.
40
KX-NT680 Series
10 Disassembly and Assembly Instructions
10.1. Remove Main Board
1. Tilt the Stand in the direction indicated and press
the
PUSH mark with both hands to remove the Stand.
2. Remove 8 Screws A.
3. Remove the Lower Cabinet.
3. Remove the Lower Cabinet.
4. Remove both Speaker Cords with the soldering iron.
5. Remove 7 Screws A.
6. Remove the Main PCB.
5. Remove 7 Screws A.
6. Remove the Main PCB.
Stand
Lower Cabinet
PUSH
PUSH
Lower Cabinet
A
A
A
A
A
A
A
A
Upper Cabinet
A
A
A
A
A
A
A
Upper Cabinet
Main PCB
Speaker Cords
soldering
soldering
Click on the first or last page to see other KX-NT680RU-B service manuals if exist.