Panasonic KX-NS5170XSX / KX-NS5170X-SX Service Manual ▷ View online
21
KX-NS5170X/KX-NS5170SX
YES
Is the dial tone
heard?
APT does not work properly.
Confirm the APT
NO
YES
Are
the LED and LCD
normal?
Go to the flowchart of
"SLT can not make a call."
NO
YES
NO
Is the
voltage between D1
and D2:15V or 15V
ON/OFF
YES
NO
Is the voltage
15V
YES
NO
Check T100
and U105.
YES
NO
Is VREF+ about 2V?
Is VREF- about 1.25V?
Replace IC401.
APT is defective.
Replace the defective parts.
Replace Q400,IC401.
YES
NO
Does PT_CUR
switch ON/OFF?
YES
NO
Does PT_POW
switch ON/OFF?
Replace IC401.
Replace IC401.
Check D100,Q100,Q101,U103,
U101,U100,R115
U101,U100,R115
and peripheral
parts.
Then replace the defective parts.
Then replace the defective parts.
22
KX-NS5170X/KX-NS5170SX
The bell of SLT does not ring.
END
OK
NG
Check the test land
between TP1-2 and GND.
Refer to "5.2.3. Power Supply Circuit"
Check the external DC/DC converter components for VBAT.
Refer to "5.2.13. Power Supply Circuit "
Refer to "5.2.13. Power Supply Circuit "
Replace the
defective parts.
defective parts.
NG
OK
OK
Check D201A-B.
OK
Check soldering of terminal of IC200A.
OK
Replace the IC200A.
NG
NG
Replace the defective parts.
Resolder the defective parts.
Confirm bell signal(AC 70 to 80V)
between IC200A_1pin and 59pin,
IC300A-W_46pin and 48pin.
NG
Check soldering of
terminal of IC200A
terminal of IC200A
NG
Check R206,208,207,209,200,201,
D202,203,C207,208,201,202,200.
D202,203,C207,208,201,202,200.
NG
Replace the defective
parts.
parts.
OK
Replace the IC200A.
OK
Resolder the defective parts.
23
KX-NS5170X/KX-NS5170SX
SLT cannot make a call.
END
OK
NG
Measure the
voltage between T
and R(V_TR) when handset
is ON-HOOK. Is it
about 30V ?
Check the external DC/DC converter components
for VBAT.
Refer to "5.2.3. Power Supply Circuit
"
NG
OK
OK
Check D201A-B.
OK
Check soldering of terminal
of IC200A.
of IC200A.
OK
Replace the IC200A.
NG
NG
Replace the
defective parts.
defective parts.
Resolder the
defective parts.
defective parts.
NG
Check soldering of terminal of IC200A.
NG
Check the test land between .
VBAT (a-x) and GND.
TP1-2 = 28 `32V at ON-HOOK mode.
VBAT (a-x) and GND.
TP1-2 = 28 `32V at ON-HOOK mode.
NG
OK
Check R206, 208, 207, 209, 200, 201,
D202,203, C207,208, 201, 202, 200.
D202,203, C207,208, 201, 202, 200.
NG
Replace the
defective parts.
defective parts.
OK
Check soldering of terminal of IC200A.
NG
OK
Replace the IC200A.
OK
Resolder the defective parts.
Replace the IC200A.
OK
Replace the
defective parts.
defective parts.
Resolder the
defective parts.
defective parts.
Measure the
voltage between T
and R(V_TR) when handset
is OFF-HOOK.
Is it about 8V-20 ?
However, V_TR is dependent
on impedance of the
connected SLT.
24
KX-NS5170X/KX-NS5170SX
Go to the flowchart
"SLT cannot make a call".
"SLT cannot make a call".
SLT cannot output DTMF.
END
NG
Is the dialton
heard when the handset is
OFF-HOOK ?
Confirm DTMF
signal between IC200A_1pin
and 59pin or IC200A_46pin
and 48pinduring sending
DTMF.
NG
Check soldering of terminal
of IC200A.
of IC200A.
NG
Resolder the
defective parts.
defective parts.
OK
OK
Replace the IC200A.
OK
Oscillation sound (noise)
is heard while calling.
is heard while calling.
END
NG
Check soldering of terminal
of IC200A.
of IC200A.
OK
Resolder the defective parts.
Replace the IC200A.
OK
Click on the first or last page to see other KX-NS5170XSX / KX-NS5170X-SX service manuals if exist.