DOWNLOAD Panasonic KX-HDV130RU / RUB Service Manual ↓ Size: 5.87 MB | Pages: 62 in PDF or view online for FREE

17

During talking, used to place a call on Hold. In standby mode, used to retrieve a call on hold if there is one, or used to access your 
voice mailbox if no call is on hold.

Used to confirm the selected item.
LCD (Liquid Crystal Display)
For details about the LCD.
Soft Keys
A/B/C (located from left to right) are used to select the item displayed on the bottom line of the display. For details about the soft keys.
Navigator Key
The Navigator Key includes four direction keys. The direction keys are used to move the cursor to
select an item. If in standby mode, pressing the keys perform the following functions:
LEFT ( ) 

 Used to display the Incoming call log.

*1

RIGHT ( ) 

 Used to open the phonebook.

*1

*1 When the BroadCloud (Presence) feature is enabled, the phone will operate as follows. 

Contact your administrator for further information.
LEFT: Used to display Presence.
RIGHT: Used to display Favorites.

Ringer/Message Waiting/Missed Call Indicator
The lamp flashes when you are receiving a call, or when you have an unread message or missed call notification.

Used to perform the assigned function. When this key is assigned as a Line key, it can be used to confirm the status or seize line 1. 

Used to perform the assigned function. When this key is assigned as a Line key, it can be used to confirm the status or seize line 2.

Handset Hook
Keeps the handset stable when the unit is mounted on a wall. 

Used to redial the last dialed number.

Used for performing headset operations.

Used to receive an incoming call in hands-free mode or mute the microphone/handset during a conversation.

Used to adjust the ringer/receiver volume.

Used to cancel the selected item.
Microphone
Used for hands-free conversation.

Used for performing hands-free operations.

Used to transfer a call to another party.

Used to establish a multiple-party conversation.
Headset Jack
Optional headsets can be used with this unit. (Not all operations with the headsets can be guaranteed.) 
For up-to-date information about headsets that have been tested with this unit, refer to the following web site:
http://panasonic.net/pcc/support/sipphone

18

Connect the Ethernet cable, the Handset Cord and the AC adaptor (Option) to the unit.

*2

*3

*1

*1 PoE HUB
*2 Optional AC adaptor
*3 Optional headset

For up-to-date information about headsets that have been tested with this unit, refer to the following
web sites:
http://panasonic.net/pcc/support/sipphone/

The initial setting for the IP address is "DHCP—Auto". For information about your network
environment, contact your administrator. 

Use flexible cables without jack covers. Do not use cables with a hard coating that may tear or crack
when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.

Connect the cables as shown in the following illustration.

19

This is for VoIP communication TEST.

Setting of Unit are required before communication test by Peer to Peer Mode. 
Refer to from 7.1.1 Preparation (P.19) to 7.1.2 Connection for Test (P.20) . 

• Unit (for Test phone and Reference phone): Each one
• Ethernet (LAN) cable

1. Push [2][6][*] and connect power plug (AC adaptor/PoE).
2. Wait until LCD displays [p2p mode]. Then release the three keys.
3. Then the LCD displays [P2P Mode]. Press OK.
4. Then it enters P2P Mode Setting. Choose the any mode.

Normal /Test1 (192.168.0.241)/Test2 (192.168.0.240)

5. Then the LCD displays [Set OK]. Remove and reconnect the plug.

Ethernet (LAN) cable

Customer's Unit

Reference Unit

20

1. Connect LAN port on Customer's unit (for reference) to LAN port on Reference unit (for test) with Ethernet (LAN) cable.

2. Plug the each unit's (for test and reference) AC adaptor or PoE HUB.

1. Pick up handset (OFF Hook), then dial the following number (for test).

[0] [1] [2] [3]

2. Answer the call by pressing [SP-PHONE] button on unit (for reference), and confirm the voice and the display.
3. Disconnect the call by unit (for reference).
4. Pick up handset (OFF Hook), then dial the following number (for reference). 

[0] [4] [5] [6]

5. Answer the call by pressing [SP-PHONE] button on unit (for test), and confirm the voice and display.
6. Disconnect the call by unit (for test).

After Communication Test, set the normal mode or Factory Setting (P.22).

Ethernet (LAN) cable

Customer's Unit
Tel no: 0456

Reference Unit
Tel no: 0123

IP: 192.168.0.241
TEST mode 1

IP: 192.168.0.240
TEST mode 2

PoE HUB

Optional AC adaptor