Panasonic UE-608020 Service Manual ▷ View online
9
4.3.
Replacing the Battery in the Electronic Pen
When the Electronic Pen battery is low, the Electronic Pen status LED blinks green.
The continuous use of the Electronic Pen can lead to poor performance. Replace the battery as soon as
possible.
The continuous use of the Electronic Pen can lead to poor performance. Replace the battery as soon as
possible.
1. Unlock and remove the Battery Cover.
2. Replace the battery with a new one.
Note:
• Make sure to use a AAA alkaline battery, and ensure that
(+) and (-) face the correct directions.
• Dispose of expired batteries quickly, by covering the
terminals in tape and following the disposal regulations
in your country/area.
in your country/area.
3. Close and lock the Battery Cover using the procedure of step 1
in reverse order.
in reverse order.
10
5 DISASSEMBLY INSTRUCTIONS
5.1.
Disassembly Flowchart
The following flowcharts indicate disassembly sequence for the Exterior, Unit Components, and Circuit Board assemblies.
When reassembling, perform the steps in the reverse order unless otherwise instructed in the Reassembling Notes.
When reassembling, perform the steps in the reverse order unless otherwise instructed in the Reassembling Notes.
Note: Disassembly flowchart explanation
* This sample flowchart shows that, to disassemble C, the procedures 1 and 2 must be performed first before
proceeding to the procedure 3.
proceeding to the procedure 3.
11
12
5.2.
Disassembling
5.2.1.
Battery Cover
5.2.2.
Penpoint
1. Release the lever to remove the Battery Cover.
1. Pull the Penpoint in the direction of the arrow to remove it.
Click on the first or last page to see other UE-608020 service manuals if exist.