DOWNLOAD Panasonic UE-608020 Service Manual ↓ Size: 760.05 KB | Pages: 21 in PDF or view online for FREE

Model
UE-608020
Pages
21
Size
760.05 KB
Type
PDF
Document
Service Manual
Brand
Device
Service Manual / Other / ELECTRONIC BOARD (ELECTRONIC PEN)
File
ue-608020.pdf
Date

Panasonic UE-608020 Service Manual ▷ View online

Order Number KM71205736CE
Category Number H19
Electronic Board (Electronic Pen)
Model No.
UE-608020
2
TABLE OF CONTENTS
PAGE
1 GENERAL PRECAUTIONS -------------------------------------3
1.1. Safety Precautions-----------------------------------------3
1.2. Standard for Repair Service -----------------------------3
1.3. For Service Technicians ----------------------------------3
1.4. About Lead Free Solder (PbF: Pb free) --------------3
1.5. About RoHS -------------------------------------------------4
2 SPECIFICATIONS -------------------------------------------------5
3 COMPONENT IDENTIFICATION ------------------------------6
4 MAINTENANCE ----------------------------------------------------8
4.1. Maintenance Table-----------------------------------------8
4.2. Replacing the Penpoint of the Electronic Pen ------8
4.3. Replacing the Battery in the Electronic Pen---------9
5 DISASSEMBLY INSTRUCTIONS---------------------------- 10
5.1. Disassembly Flowchart --------------------------------- 10
5.2. Disassembling -------------------------------------------- 12
6 TROUBLESHOOTING ------------------------------------------ 17
7 PARTS LOCATION AND MECHANICAL PARTS
LIST ------------------------------------------------------------------ 18
7.1. Exterior------------------------------------------------------ 19
8 REPLACEMENT PARTS LIST ------------------------------- 20
8.1. PEN Board (B) -------------------------------------------- 21
8.2. PEN Board (C) -------------------------------------------- 21
8.3. PEN Board (D) -------------------------------------------- 21
3
1 GENERAL PRECAUTIONS
1.1.
Safety Precautions
1. Before servicing, remove the battery to prevent electrical shock hazard.
2. When replacing parts, use only manufacture’s recommended components for safety.
3. After servicing, be sure to restore the wire dressing, insulation barriers, insulation papers, shields, etc.
1.2.
Standard for Repair Service
Repair service shall be provided in accordance with repair technology information such as service manual
so as to prevent fires, injury or electric shock, which can be caused by improper repair work.
1. When performing repairs, neither the products nor its parts or components shall be modified.
2. If cable assembly is supplied as the smallest unit when servicing, make sure to replace
the cable assembly.
1.3.
For Service Technicians
ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help to prevent recurring malfunctions.
1. Cover the plastic parts with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not grasp IC or LSI pins with bare fingers.
1.4.
About Lead Free Solder (PbF: Pb free)
Note
• In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder
that contains lead.
• We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn),
Silver (Ag), and Copper (Cu).
• This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and
repair work we suggest using the same type of solder.
Distinction of PbF PCB
• PCBs manufactured using lead free solder will have a PbF stamp on the PCB.
Caution
• PbF solder has a melting point that is 50 
° - 70 °F, (30 ° - 40 °C) higher than Pb solder. 
Use a soldering iron with temperature control and adjust it to 700 
° ± 20 °F (370 ° ± 10 °C).
• Exercise care when using higher temperature soldering irons: Do not heat the PCB for too long time in order to
prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100 
°F (600 °C). 
• When applying PbF solder to double layered boards, check the component side for excess solder which may flow onto
the opposite side (See figure below).
1.4.1.
Suggested Pb free solder
We recommend you to use the following solder when re-soldering components for repair. Before using other Pb free solder than the
following solder, make sure to confirm that the solder maker (you use) has the license agreement for Pb free solder.
Supplier: Senju Metal Industry Co., Ltd. (http://www.senju-m.co.jp)
Part Description in Senju: EcoSolder RMA02 P3 M705 Series
4
1.5.
About RoHS
This product is fully compliant with the national laws transposed from the EU Directive on the restriction of the use of certain
hazardous substances (RoHS) in electrical and electronic equipment, effective 1st July 2006 in the EU countries.
In order for the product to comply with the RoHS Directive, the six particular substances (lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) have been either totally eliminated or limited to the
concentration level below maximum allowed. Consequently spare parts have been changed to RoHS-compliant parts where
applicable.
Due to the application of RoHS legislation to spare parts, non-compliant spare parts cannot be used to repair compliant products put
on the EU market on or after 1st July 2006. Therefore make sure to order and use RoHS-compliant spare parts listed in this
manual.
Page of 21
Display

Panasonic UE-608020 Service Manual ▷ Download

  • DOWNLOAD Panasonic UE-608020 Service Manual ↓ Size: 760.05 KB | Pages: 21 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Panasonic UE-608020 in PDF for free, which will help you to disassemble, recover, fix and repair Panasonic UE-608020 Service Manual / Other. Information contained in Panasonic UE-608020 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.