Panasonic UB-T880 / UB-T880W Service Manual ▷ View online
37
8.2.3.
Power SW / LED Board
1. Remove the Lower Cover Back L.
(See 8.2.1.)
(See 8.2.1.)
2. Remove the 2 screws (b).
3. Disconnect the connector to the Power SW / LED Board.
38
8.2.4.
Power Cover
8.2.5.
Side Cover L
1. Remove the Lower Cover Back L. (See 8.2.1.)
2. Remove the Transmission Cover. (See 8.2.2.)
3. Remove the 2 screws (a).
4. Remove the Power Cover.
1. Remove the Power Cover. (See 8.2.4.)
2. Remove the 2 screws (a) and 3 screws (b).
3. Pull and remove the Side Cover L in the direction of the
arrows.
arrows.
39
8.2.6.
RECEPTION 1 Board
1. Remove the 4 screws (a), and then remove Reception PCB
Cover 1.
Cover 1.
2. Remove the 10 screws (a) on the RECEPTION 1 Board.
3. Disconnect the 6 connectors.
4. Release the lock levers on both sides of the connector, and
then disconnect the 3 flat-cables.
then disconnect the 3 flat-cables.
Reassembling Note:
When reassembling, make sure that the flat-cables are
not wrinkled.
If they are wrinkled, adjust the board position by
using 4 screws that support the Reception PCB Box 1.
not wrinkled.
If they are wrinkled, adjust the board position by
using 4 screws that support the Reception PCB Box 1.
40
8.2.7.
POWER Board
8.2.8.
Dongle Cover and Panel Cover
1. Remove the Side Cover L. (See 8.2.5.)
2. Remove the 6 screws (a) that fix the Power PCB Cover.
Then, remove the Power PCB Cover.
Then, remove the Power PCB Cover.
3. Remove the 6 screws (a) on the Power Board.
4. Disconnect the 5 connectors.
Then, remove the POWER Board.
Then, remove the POWER Board.
1. Remove the Side Cover L. (See 8.2.5.)
2. Remove the screw (d).
Then, remove the Dongle Cover.
Then, remove the Dongle Cover.
Click on the first or last page to see other UB-T880 / UB-T880W service manuals if exist.