Panasonic UB-T880 / UB-T880W Service Manual ▷ View online
53
8.2.20. RECEPTION 2 Board
1. Remove the Reception Cover. (See 8.2.18.)
2. Remove the 3 screws (a) that fix the Reception PCB Cover 2.
(Available only for UB-T880)
(Available only for UB-T880)
3. Remove the 4 screws (a) that fix the Reception PCB Cover 2.
(Available only for UB-T880W)
(Available only for UB-T880W)
4. Remove Reception PCB Cover 2.
54
5. Remove the 10 screws (a) on the RECEPTION 2 Board.
6. Disconnect the 4 connectors.
7. Release the lock levers on both sides of each connector, and
then disconnect the 3 flat-cables.
then disconnect the 3 flat-cables.
Reassembling Note:
When reassembling, make sure that the flat-cables are
not wrinkled. If they are wrinkled, adjust the board
position by using 4 screws that support the Reception
PCB Box 2.
not wrinkled. If they are wrinkled, adjust the board
position by using 4 screws that support the Reception
PCB Box 2.
55
8.2.21. Dongle
1. Remove the Lower Cover Back L (See 8.2.1.)
2. Remove the 2 screws (b) that fasten the Dongle Plate.
3. Remove the Dongle from the USB Cable.
56
8.3.
Disassembling Electronic Pen
8.3.1.
Pen Battery Cover
8.3.2.
Top Tip Assy.
1. Unlock the Shutter Button.
2. Remove the Pen Battery Cover.
3. Remove the Battery.
1. Remove the Pen Battery Cover. (See 8.3.1.)
2. Rotate the Top Tip Assy. in the direction of the arrow
to remove it.
to remove it.
Click on the first or last page to see other UB-T880 / UB-T880W service manuals if exist.