Panasonic UB-T880 / UB-T880W Service Manual ▷ View online
21
4.6.
Assembling the elite Panaboard
4.6.1.
For Wall Mounting
1. Attach the Power Cord.
Connect the Power Cord to the elite Panaboard before
installing on a wall.
Connect the Power Cord to the elite Panaboard before
installing on a wall.
2. Depending on the location of the outlet, install the Power Cord
as illustrated in the right figure.
as illustrated in the right figure.
3. Remove the 4 push-turn rivets on the fasteners on the bottom
of the board.
Turn the push-turn rivets counter-clockwise with a Phillips-head
screwdriver. When the fastener pops up, the part can be
removed.
of the board.
Turn the push-turn rivets counter-clockwise with a Phillips-head
screwdriver. When the fastener pops up, the part can be
removed.
22
4. Hang the elite Panaboard on the wall mounting plates with the
screw heads.
screw heads.
5. Remove the screws on each end of the bottom of the lower
frame cover.
UB-T880: 2 screws
UB-T880W: 4 screws
Note:
frame cover.
UB-T880: 2 screws
UB-T880W: 4 screws
Note:
UB-T880 is shown in the right figure as an example.
6. Open the Pen Tray (1), remove the 2 screw caps and the 2
screws, and remove the Lower Frame Cover (2).
screws, and remove the Lower Frame Cover (2).
Note:
When removing the screw caps, hold them with your finger to
prevent them from flying off.
prevent them from flying off.
23
7. Fasten to the wall.
Use 4 screws to attach the fasteners on the bottom of the board
securely to the wall.
Use 4 screws to attach the fasteners on the bottom of the board
securely to the wall.
Note:
4 screws are not included with the elite Panaboard. Please
purchase screws with a size of M6, appropriate for your type
of wall.
purchase screws with a size of M6, appropriate for your type
of wall.
8. Attach the Lower Frame Cover.
Perform step 6 and step 5 in reverse and attach the Lower
Frame Cover, making sure there is no unevenness with the
front surface.
Perform step 6 and step 5 in reverse and attach the Lower
Frame Cover, making sure there is no unevenness with the
front surface.
Note:
1. When mounting on a wall, do not hit or jolt the elite
Panaboard.
2. After mounting, gently apply some weight on the elite
Panaboard to make sure that it is securely fastened to the
wall.
Panaboard.
2. After mounting, gently apply some weight on the elite
Panaboard to make sure that it is securely fastened to the
wall.
9. Confirm that the elite Panaboard can operate.
See 4.8 “Confirming the elite Panaboard Operation”.
See 4.8 “Confirming the elite Panaboard Operation”.
10. Turn off the power switch and unplug the power cord from the
AC outlet.
AC outlet.
11. Wipe the screen board surface.
Gently wipe the screen board surface with a soft, moist cloth.
Note:
Gently wipe the screen board surface with a soft, moist cloth.
Note:
1. Do not use thinner, benzene, or abrasive chemicals to
clean. (Doing so can result in discoloration.)
2. Do not wipe the screen board with a dry cloth.
(Doing so can cause static electricity build-up.)
clean. (Doing so can result in discoloration.)
2. Do not wipe the screen board with a dry cloth.
(Doing so can cause static electricity build-up.)
24
4.6.2.
For Mounting on the Stand KX-B061 (Sold Separately)
1. Attach the Power Cord.
Connect the Power Cord to the elite Panaboard before installing
on the Stand.
Connect the Power Cord to the elite Panaboard before installing
on the Stand.
2. Depending on the location of the outlet, install the Power Cord
as illustrated in the right figure.
as illustrated in the right figure.
3. Hang the elite Panaboard on the Stand with the screw heads.
Click on the first or last page to see other UB-T880 / UB-T880W service manuals if exist.