Panasonic UB-T880 / UB-T880W Service Manual ▷ View online
13
4 INSTALLATION
The elite Panaboard is used by mounting it on a wall or a stand (sold separately).
When mounting the elite Panaboard on a wall, refer to the following steps or Operating Instructions
for Model No.UB-T880/T880W.
When using a stand (sold separately), refer to the following steps and the Operating Instructions
for Model No.UB-T880/T880W.
When mounting the elite Panaboard on a wall, refer to the following steps or Operating Instructions
for Model No.UB-T880/T880W.
When using a stand (sold separately), refer to the following steps and the Operating Instructions
for Model No.UB-T880/T880W.
4.1.
Installation Requirements
This is a sophisticated piece of equipment, which somewhat depends on the surrounding conditions for optimum operation.
Attention to the following will result in more reliable and quality performance.
This model should not be installed in areas with the following condition.
(1) High temperature and humidity or low temperature and low humidity
(2) Direct exposure to sunlight
(3) Direct exposure to air conditioners, or close to heater ducts
(4) Uneven floor
Attention to the following will result in more reliable and quality performance.
This model should not be installed in areas with the following condition.
(1) High temperature and humidity or low temperature and low humidity
(2) Direct exposure to sunlight
(3) Direct exposure to air conditioners, or close to heater ducts
(4) Uneven floor
4.2.
Minimum Space Requirements
Refer to 2.7 “Exterior Dimensions”.
14
4.3.
Included Accessories
Confirm that the following items are included with the elite Panaboard.
Note:
Screws (8 count) for wall mounting are not included. Please purchase screws with a size of M6, appropriate
for type of wall. (Refer to 4.4.3 ” Wall Types and Installation Procedures”.)
Screws (8 count) for wall mounting are not included. Please purchase screws with a size of M6, appropriate
for type of wall. (Refer to 4.4.3 ” Wall Types and Installation Procedures”.)
15
4.4.
Wall Mounting Construction
4.4.1.
Checking the Wall
When mounting on a wall, consult with your building's owner, caretaker or construction manager to determine if the wall strength is
sufficient to install the elite Panaboard.
For safety, install the elite Panaboard only after thoroughly understanding the type of walls, the appropriate types of screws and
the construction method.
Caution:
sufficient to install the elite Panaboard.
For safety, install the elite Panaboard only after thoroughly understanding the type of walls, the appropriate types of screws and
the construction method.
Caution:
Do not attach the electronic board to mortared walls. Accidental electric leakage from the wall mounting plate bolts to
metal laths or wire laths can cause heat, smoke or a fire.
I. Necessary Tools and Parts (not included with the elite Panaboard)
Drill, Screwdriver, Measuring tape, Level, 8 screws (M6 size)
II. Before Starting
1. Make sure that the wall is strong enough to support the elite Panaboard.
metal laths or wire laths can cause heat, smoke or a fire.
I. Necessary Tools and Parts (not included with the elite Panaboard)
Drill, Screwdriver, Measuring tape, Level, 8 screws (M6 size)
II. Before Starting
1. Make sure that the wall is strong enough to support the elite Panaboard.
→
Rated strength:
greater than 1,962 N (200 kgf)
Note:
If necessary, reinforce the wall so that it is strong enough to support the elite Panaboard.
2. Make sure that the location is large enough to accommodate the elite Panaboard.
Height: greater than 2,100 mm (6 ft. 10.68 in.)
Width: greater than 2,000 mm (6 ft. 6.75 in.)
3. Make sure that the AC outlet is within 3 m (9 ft. 10.12 in.) of where the elite Panaboard will be mounted and that it
will not be behind the elite Panaboard.
If necessary, reinforce the wall so that it is strong enough to support the elite Panaboard.
2. Make sure that the location is large enough to accommodate the elite Panaboard.
Height: greater than 2,100 mm (6 ft. 10.68 in.)
Width: greater than 2,000 mm (6 ft. 6.75 in.)
3. Make sure that the AC outlet is within 3 m (9 ft. 10.12 in.) of where the elite Panaboard will be mounted and that it
will not be behind the elite Panaboard.
16
4.4.2.
Installing the Wall Mounting Plates
1. Ensure that the wall is strong enough to support the elite Panaboard.
Note: Rated strength
Note: Rated strength
Greater than 1,962 N (200 kgf)
2. Using the measuring tape and level, mark the 8 locations to insert the screws.
3. Drill 8 holes for the wall mounting plates.
Drill holes appropriate for the screws you are using.
Drill holes appropriate for the screws you are using.
Click on the first or last page to see other UB-T880 / UB-T880W service manuals if exist.