Panasonic UB-T880 / UB-T880W (serv.man4) Service Manual ▷ View online
41
8.2.3.
Power SW / LED Board
1. Remove the Lower Cover Back L.
(See 8.2.1.)
(See 8.2.1.)
2. Remove the 2 screws (b).
3. Disconnect the connector to the Power SW / LED Board.
42
8.2.4.
Power Cover
8.2.5.
Side Cover L
1. Remove the Lower Cover Back L. (See 8.2.1.)
2. Remove the Transmission Cover. (See 8.2.2.)
3. Remove the 2 screws (a).
4. Remove the Power Cover.
1. Remove the Power Cover. (See 8.2.4.)
2. Remove the 2 screws (a) and 3 screws (b).
3. Pull and remove the Side Cover L in the direction of the
arrows.
arrows.
43
8.2.6.
RECEPTION 1 Board
8.2.6.1.
1st Version product
1. Remove the Side Cover L. (See 8.2.5.)
2. Remove the 4 screws (a), and then remove the Reception PCB
Cover 1.
Cover 1.
44
3. Remove the 10 screws (a) on the RECEPTION 1 Board.
4. Disconnect the 6 connectors.
5. Release the lock levers on both sides of the connector, and
then disconnect the 3 flat-cables.
then disconnect the 3 flat-cables.
Reassembling Note:
When reassembling, make sure that the flat-cables are
not wrinkled.
If they are wrinkled, adjust the board position by
using the 4 screws that support the Reception PCB Box 1.
not wrinkled.
If they are wrinkled, adjust the board position by
using the 4 screws that support the Reception PCB Box 1.
Click on the first or last page to see other UB-T880 / UB-T880W (serv.man4) service manuals if exist.