Panasonic UB-T880 / UB-T880W (serv.man4) Service Manual ▷ View online
17
4.4.2.
Installing the Wall Mounting Plates
1. Ensure that the wall is strong enough to support the elite Panaboard.
Note: Rated strength
Note: Rated strength
Greater than 1,962 N (200 kgf)
2. Using the measuring tape and level, mark the 8 locations to insert the screws.
3. Drill 8 holes for the wall mounting plates.
Drill holes appropriate for the screws you are using.
Drill holes appropriate for the screws you are using.
18
4. Install the wall mounting plates using the 4 screws.
4 screws (2 from each mounting plate) are used. The remaining 4 screws are used after installing the elite Panaboard
on the wall.
4 screws (2 from each mounting plate) are used. The remaining 4 screws are used after installing the elite Panaboard
on the wall.
Note:
1. Screws (8 count) are not included with the elite Panaboard.
2. Tighten the bolt so that it will not become loose.
3. When drilling the holes and installing the wall mounting plates, follow the procedure in 4.4.3
3. When drilling the holes and installing the wall mounting plates, follow the procedure in 4.4.3
“Wall Types and Installation Procedures”.
5. Mount the elite Panaboard on the wall.
Refer to 4.6 “Assembling the elite Panaboard”.
Refer to 4.6 “Assembling the elite Panaboard”.
19
4.4.3.
Wall Types and Installation Procedures
The method for attaching the wall mounting plates to the wall will vary depending on the wall's structure.
Three available options are listed below.
Other methods may be necessary depending on the wall.
Three available options are listed below.
Other methods may be necessary depending on the wall.
4.4.3.1.
Metal or Concrete walls
4.4.3.2.
Plasterboard walls
Stud plug (not included) are needed.
Drill eight holes in the wall.
For the correct hole size, refer to the instructions for the particular
stud plugs used.
stud plugs used.
Insert the bolt through the hole in the wall mounting plate and
tighten until the wall mounting plate is securely fixed to the wall.
tighten until the wall mounting plate is securely fixed to the wall.
Split-wing toggles (not included) are needed.
Insert the bolt through the hole in the wall mounting plate and into
the hole in the wall so that the arms of the split-wing toggle are
horizontal.
the hole in the wall so that the arms of the split-wing toggle are
horizontal.
For the correct hole size, refer to the instructions for the particular
split-wing toggles used.
split-wing toggles used.
After the arms expand, pull the wall mounting plate out until the
arms of the split-wing toggle grip firmly into the wall.
arms of the split-wing toggle grip firmly into the wall.
Tighten the bolt until the wall mounting plate is securely fixed into
the wall.
the wall.
20
4.4.3.3.
Wooden walls
Wood screws (not included) are needed.
Insert the wood screws through the hole in the wall mounting
plate and tighten until the wall mounting plate is securely fixed to
the wall.
plate and tighten until the wall mounting plate is securely fixed to
the wall.
For the correct hole size, refer to the instructions for the particular
wood screws used.
wood screws used.
Click on the first or last page to see other UB-T880 / UB-T880W (serv.man4) service manuals if exist.