Panasonic UB-T781 / UB-T781W / UB-T761 Service Manual ▷ View online
21
UB-T781/T781W/T761
3.5.
Preparing for Removing the elite Panaboard from Its Packaging
Open the box, remove the accessory box & packing foam, and open the plastic sheet of the elite Panaboard.
Notice:
•
When handling the screen board, hold it by the edge frame and not the screen board itself. (Holding the screen board can result in damage.)
•
The packing materials in the shipping box are necessary for repackaging, so keep them in a safe place.
Note:
•
The warranty may not be included depending on country/area.
22
UB-T781/T781W/T761
3.6.
Assembling the elite Panaboard
After unscrewing the attachment cover screws <(1)>, fix them
in the holes after sliding the attchement cover down, as shown
in the right-sided illustration above.
in the holes after sliding the attchement cover down, as shown
in the right-sided illustration above.
<For Wall Mounting>
1. Loosely wrap the power cord with the cable tie, and plug the
1. Loosely wrap the power cord with the cable tie, and plug the
power cord into the AC inlet.
• Connect the power cord to the elite Panaboard before install-
ing on a wall.
2. Insert the end of the cable tie into the cable tie fastening hole
behind the control-power cover-back.
3. Pull the loose end of the cable tie to tighten it, and install the
power cord depending on the location of the outlet, as illustrated
in the following diagrams.
in the following diagrams.
• When attaching the power cord downward.
• When attaching the power cord along the lower side of the
elite Panaboard.
4. Remove the screw <(1)> of the attachment cover <(2)>, which
is fixed to the board attachment, and slide the attachment
cover down.
Ensure that the attachment cover and the screw hole <(3)> of the
board attachment are aligned.
cover down.
Ensure that the attachment cover and the screw hole <(3)> of the
board attachment are aligned.
23
UB-T781/T781W/T761
Note:
The main unit and the USB speakers on the front lower
frame cover are connected with the cable. Be careful not to
damage the connectors.
frame cover are connected with the cable. Be careful not to
damage the connectors.
5. Hang the elite Panaboard on the wall mounting plates with the
screw heads.
6. Unscrew the 4 screws from the front lower frame cover.
7. Lift the bottom of the front lower frame cover to remove it.
8. Disconnect the 2 connectors from the audio board <(4)>.
9. Fasten to the wall.
Fasten the lower portion of the board attachment securely to the
wall.
wall.
10. Connect the 2 connectors of the USB speaker to the audio board
<(4)>.
24
UB-T781/T781W/T761
Notice
•
When mounting on a wall, do not hit or jolt the elite Panaboard.
•
After mounting, gently apply some weight on the elite Panaboard to
make sure that it is securely fastened to the wall.
make sure that it is securely fastened to the wall.
Note
•
After installation is complete, use the included cable holder to man-
age the power cord and USB cable.
age the power cord and USB cable.
Notice
•
Do not use thinner, benzine, or abrasive chemicals to clean. (Doing
so can result in discoloration.)
so can result in discoloration.)
•
Do not wipe the screen board with a dry cloth. (Doing so can cause
static electricity build-up.)
static electricity build-up.)
11. Attach the front lower frame cover.
Attach the front lower frame cover to the elite Panaboard and fix it
using 4 screws, ensuring that the cover is flush with the main unit.
using 4 screws, ensuring that the cover is flush with the main unit.
12. Wipe the screen board surface.
Gently wipe the screen board surface with a soft, moist cloth.
13. Confirm that the elite Panaboard can operate. (Refer to the sec-
tion 3.7 Confirming the elite Panaboard Operation.)
<For Mounting on a Stand (Sold Separately)>
1. Attach the power cord.
1. Attach the power cord.
• Connect the power cord to the elite Panaboard before installing
on the stand.
2. Depending on the location of the outlet, install the power cord as
illustrated in the following diagrams.
• When attaching the power cord downward.
• When attaching the power cord along the lower side of the elite
Panaboard.
Click on the first or last page to see other UB-T781 / UB-T781W / UB-T761 service manuals if exist.