Panasonic UB-5365 / UB-5865 (serv.man2) Service Manual ▷ View online
53
7.2.6.
Replacing the Battery
1. Loosen the screw (one location) on the side of the control
panel, and remove the Battery Holder.
2. Remove the old battery, and install a new one with the positive
terminal upward.
Note:
Always use "CR2032" batteries and be sure that the bat-
tery is inserted as indicated on the Battery Holder.
tery is inserted as indicated on the Battery Holder.
3. Set the Battery Holder with the battery side upward and
retighten the screw in step 1.
4. Set the current time. (Refer to the Operating Instructions for
details on setting the current time.)
details on setting the current time.)
54
8 DISASSEMBLY INSTRUCTIONS
8.1.
Disassembly Flowchart
The following flowcharts indicate disassembly sequence for the Exterior, Unit Components, and Circuit Board assemblies.
When reassembling, perform the steps in the reverse order unless otherwise instructed in the Reassembling Notes.
When reassembling, perform the steps in the reverse order unless otherwise instructed in the Reassembling Notes.
Note:
Disassembly flowchart explanation
* This sample flowchart shows that, to disassemble C, the procedures 1 and 2 must be performed first before proceed-
ing to the procedure 3.
ing to the procedure 3.
55
8.1.1.
Screen Block
56
8.1.2.
Printer Block
Click on the first or last page to see other UB-5365 / UB-5865 (serv.man2) service manuals if exist.