Panasonic KV-SS080 Service Manual ▷ View online
21
8.2.2.
Hinge Assy. L
8.2.3.
Hinge Assy. R
1. Remove the Document Cover. (See 8.2.1.)
2. Remove the 6 screws (b), and then release the Hinge Assy. L
from the Document Cover.
from the Document Cover.
Note: Hinge Assy.
Hinge Assy. R: Only used for the right side
Hinge Assy. L: Only used for the left side
Hinge Assy. L: Only used for the left side
1. Remove the Document Cover. (See 8.2.1.)
2. Remove the 6 screws (b), and then release the Hinge Assy. R
from the Document Cover.
from the Document Cover.
22
8.2.4.
Top Cover Assy.
8.2.5.
Panel Cover
1. Remove the Document Cover. (See 8.2.1.)
2. Turn over the scanner unit, and then remove the 4 screws (f).
3. Lift the Top Cover Assy. in the direction of the arrows to
release its assembly from the Bottom Cover.
release its assembly from the Bottom Cover.
Note:
Following this section, when proceeding to
disassembling the parts mounted to the Bottom Cover
Assy., be sure to cover the top surface of the Scanning
Unit so as to prevent screws or other foreign material
from falling into the unit.
disassembling the parts mounted to the Bottom Cover
Assy., be sure to cover the top surface of the Scanning
Unit so as to prevent screws or other foreign material
from falling into the unit.
1. Remove the Top Cover Assy. (See 8.2.4.)
2. Turn over the Top Cover Assy. and then remove the 2
screws (a).
screws (a).
3. While pushing down the center of the Panel Cover, release the
3 locking sections to remove the Panel Cover.
3 locking sections to remove the Panel Cover.
23
8.2.6.
Panel LED Cover
8.2.7.
Start Button
1. Remove the Panel Cover. (See 8.2.5.)
2. Unlock the hooks to release the Panel LED Cover from the
Panel Cover.
Panel Cover.
1. Remove the Top Cover Assy. (See 8.2.4.)
2. While releasing the 2 hooks from the guides in the direction of
the arrows, pull the Start Button to carefully release the button
from the Top Cover Assy.
the arrows, pull the Start Button to carefully release the button
from the Top Cover Assy.
24
8.2.8.
PANEL Board
1. Remove the Top Cover Assy. (See 8.2.4.)
2. Remove the 2 screws (a) and 1 connector.
Click on the first or last page to see other KV-SS080 service manuals if exist.