Panasonic KV-SL3066 / KV-SL3056 / KV-SL3055 / KV-SL3036 / KV-SL3035 Service Manual ▷ View online
45
8.6.
Flatbed
8.6.1.
Exit Stopper
8.6.2.
FB Case Cover
(1) Stand the Exit Stopper, remove the FB Case Cover from the
FB Case Cover while pushing it inward.
(arrow
(arrow
1
->
2
->
3
)
(2) Separate the Exit Stopper (Sub) from the Exit Stopper
(Main).
Reassembling Note:
After attaching the STOPPER TRAY, confirm if opening and closing operation is proper. (3step 1CYCLE).
(1) Lift up the FB Case Cover a little.
(2) Release the both side’ s Hooks by pushing the Hinge inward
(2) Release the both side’ s Hooks by pushing the Hinge inward
as shown the figure and remove from the FB Case.
Exit Stopper (Main)
Exit Stopper (Sub)
Exit Stopper
1
2
3
1STEP
2STEP
3STEP
The angle that can be opened
and closed is as shown in the
above figure.
and closed is as shown in the
above figure.
: Hook
Hinge
FB Case Hinge
FB Case Hinge
FB Case Cover
46
8.6.3.
Flatbed Sheet
(1) Open the FB Case Cover.
(2) Slightly lift the top of the Flatbed Sheet (
(2) Slightly lift the top of the Flatbed Sheet (
1
) to unhook it from
the document cover, and then remove the Flatbed Sheet (
2
).
Reassembling Note:
Reverse the Flatbed Sheet, and then place the tips of the
ears of the flatbed sheet (
ears of the flatbed sheet (
1,2,3,4
) so that they fit under the
tabs of the FB Case Cover (
1,2,3,4
).
Fit the grooves of the Flatbed Sheet into the FB Case Cover.
Confirm that all 4 ears of the Flatbed Sheet are under the
tabs.
Confirm that all 4 ears of the Flatbed Sheet are under the
tabs.
1
1
1
2
FB Case Cover
Flatbed Sheet
1
1
2
3
4
3
4
2
1
FB Case Cover
FB Case Cover
Flatbed Sheet
Flatbed Sheet
47
8.6.4.
FB Case and FB Base
(1) Remove the Spring and 4 screws C.
(2) Remove 2 hooks of
1
while lifting FB Case.
(3) Remove 2 hooks of
2
.
(4) Remove 2 hooks of
3
.
FB Case
C
FB Base
Spring
C
C
C
FB Base
FB Case
: Groove
Hook
1
1
2
2
3
3
Hook
Hook
48
8.6.5.
DOCUMENT COVER SENSOR Board
8.6.6.
CARRIAGE HOME DETECTOR Board
8.6.7.
FLATBED RELAY Board
(1) Separate the FB Case from the FB Base.
(
8.6.4. FB Case and FB Base
)
(2) Remove the Open Lever and Spring.
(3) Remove the 2 screws C and 2 connectors.
(4) Remove the DOCUMENT COVER SENSOR Board from FB
(3) Remove the 2 screws C and 2 connectors.
(4) Remove the DOCUMENT COVER SENSOR Board from FB
Base.
Reassembling Note:
Check if the direction of the Open Lever is correct.
(1) Separate the FB Case from the FB Base.
(
8.6.4. FB Case and FB Base
)
(2) Remove the connector and 2 screws C.
(3) Remove the CARRIAGE HOME DETECTOR Board from
(3) Remove the CARRIAGE HOME DETECTOR Board from
the FB Base.
(1) Separate the FB Case from the FB Base.
(
8.6.4. FB Case and FB Base
)
(2) Remove the 3 connectors and 2 screws C.
(3) Remove the FLATBED RELAY Board from FB Base.
(3) Remove the FLATBED RELAY Board from FB Base.
Spring
C
C
Open Lever
DOCUMENT COVER
SENSOR Board
SENSOR Board
Connector
Connector
FB Base
OK
NG
C
C
FB Base
Connector
CARRIAGE HOME
DETECTOR Board
DETECTOR Board
C
C
FFC
FB Base
FLATBED RELAY
Board
Board
Connector
Connector
Click on the first or last page to see other KV-SL3066 / KV-SL3056 / KV-SL3055 / KV-SL3036 / KV-SL3035 service manuals if exist.