Panasonic KV-SL1066-M2 / KV-SL1066-U2 / KV-SL1066-B2 / KV-SL1066-K2 / KV-SL1066-C2 / KV-SL1066-CH / KV-SL1056-M2 / KV-SL1056-U2 / KV-SL1055-C2 / KV-SL1055-CH / KV-SL1036-C2 / KV-SL1055-CH / KV-SL1035-C2 / KV-SL1055-CH Service Manual ▷ View online
53
10.3.8. Adjustment
Item
Operation
Default
Remarks
Shading
1. Click "Shading" on the adjust menu.
2. Set the resolution (300dpi, 600dpi) and click "OK".
3. Clean the conveyor, rollers, Scanning Glass (F) and (B)
2. Set the resolution (300dpi, 600dpi) and click "OK".
3. Clean the conveyor, rollers, Scanning Glass (F) and (B)
according to the message on the display. And click "OK".
4. Set Shading Sheet (Part No:PNQE1093Z-J) on the Feed Tray.
5. And click "OK" to scan the Shading Sheet.
6. After "Finished Adjusting" message, click "OK" to return to
5. And click "OK" to scan the Shading Sheet.
6. After "Finished Adjusting" message, click "OK" to return to
the adjust menu.
—
Until this process is
completed, don't stop the
process by opening any doors
or turning off the scanner.
completed, don't stop the
process by opening any doors
or turning off the scanner.
Shading data
1. Click "Shading data" on the adjust menu.
2. Click "Get Shading Data".
3. Save it to selected folder.
4. Click "OK" to return to the adjust menu.
2. Click "Get Shading Data".
3. Save it to selected folder.
4. Click "OK" to return to the adjust menu.
—
This data file is used for
analysis.
analysis.
All position
1. Set 2 pcs of test chart A (Part No.: PBQX90095Z-J) on the
Feed Tray.
2. Click "All position" on the adjust menu to execute scanning
position and length adjustment.
3. Check the result.
4. Click "OK" to return to the adjust menu.
4. Click "OK" to return to the adjust menu.
—
Set 2 pcs of test chart A on
the Feed Tray in order.
1st page: Front side
2nd page: Back side
the Feed Tray in order.
1st page: Front side
2nd page: Back side
Individual position 1. Adjust Automatically.
a. Set test chart A (Part No.:PBQX90095Z-J) on the Feed Tray.
b. Click "Individual position" on the adjust menu.
c. Click one of 6 "Adjust Automatically" buttons to execute
b. Click "Individual position" on the adjust menu.
c. Click one of 6 "Adjust Automatically" buttons to execute
the adjustment.
d. Check the result.
e. Click "OK" to finish the adjustment.
f. Click "OK" to return to the adjust menu.
e. Click "OK" to finish the adjustment.
f. Click "OK" to return to the adjust menu.
2. Adjust Manually.
a. Click "Individual position" on the adjust menu.
b. Change the parameters (mm, %) as required. (Refer to
b. Change the parameters (mm, %) as required. (Refer to
Remarks.)
c. Click "OK" to renew the setting, and to return to the adjust
menu.
—
1. Adjust Automatically
Auto. adjustments items
1) Length
2) Paper End Position
3) Front V. Position
4) Front H. Position
5) Back V. Position
6) Back H. Position
1) Length
2) Paper End Position
3) Front V. Position
4) Front H. Position
5) Back V. Position
6) Back H. Position
2. Adjust Manually
(Length)
(Length)
+: Increasing the value
allows the scanned image to
extend vertically.
allows the scanned image to
extend vertically.
(Paper End Position)
+: On the Length Control
mode, increasing the value
allows the paper-end timing
to be earlier.
mode, increasing the value
allows the paper-end timing
to be earlier.
(Vertical Position)
+: Increasing the value shifts
the scanned image position
downward.
the scanned image position
downward.
(Horizontal Position)
+: Increasing the value shifts
the scanned image position
to the right.
the scanned image position
to the right.
Note
If the appropriate scanning
position cannot be obtained
by any of the manual
adjustments, check CIS
installation.
54
10.3.9. Other
Double feed
1. Set the Shading Sheet (Part No.: PNQE1093Z-J) on the Feed
Tray, sliding the Document Guides so that they match the
document width.
document width.
2. Click "Double feed" on the adjust menu.
3. Click "Adjust Automatically" to adjust the double feed
3. Click "Adjust Automatically" to adjust the double feed
sensitivity.
4. Check the result.
5. Click "OK" finish the adjustment.
6. Click "OK" to return to the adjust menu.
5. Click "OK" finish the adjustment.
6. Click "OK" to return to the adjust menu.
—
* USB ID
1. Click "USB ID" on the adjust menu.
2. Click "Set" to store a new ID number for a new replaced
2. Click "Set" to store a new ID number for a new replaced
CONTROL Board.
3. Click "Close" to return to the adjust menu.
—
*This setting is available
only for a new replaced
CONTROL Board.
only for a new replaced
CONTROL Board.
Sensor sensitive
level
level
1. Click "Sensor sensitive level" on the adjust menu.
Note
Note
If dusts remain on the Starting Sensor, the adjustment is not
done properly and the paper detection may not work.
2. Click "Adjust".
3. Check each Sensor sensitive level (LED Current).
4. Click "Close" to return to the adjust menu.
3. Check each Sensor sensitive level (LED Current).
4. Click "Close" to return to the adjust menu.
—
LED Current
normal value : 50-250
normal value : 50-250
Item
Operation
Default
Remarks
Shading Sheet
Information
Information
1. Click "Shading Sheet Information" on the main menu.
2. Check the Shading Sheet part no.
2. Check the Shading Sheet part no.
—
Download the
latest version
latest version
1. Click "Download the latest version" to open the site for
Panasonic scanner products that provides the scanner
software to be downloaded.
software to be downloaded.
—
Error Log
1. Click "Error Log" to open "Save As" dialog-box.
2. After renaming a log file, perform "Save" to save it. Refer to
2. After renaming a log file, perform "Save" to save it. Refer to
10.3.3.
Error Log for the detail.
—
Select Scanner
1. Click "Select Scanner" on the main menu.
2. Select a scanner connected to the PC.
2. Select a scanner connected to the PC.
—
System Log
1. Click "System Log" on the main menu to save the scanner
and the PC information as text files.
—
Item
Operation
Default
Remarks
55
10.4. Service Mode
Without connecting the scanner to the PC, the following Scanner self-tests can be performed. The following mechanical tests are
generally used after replacing or reassembling rollers and other mechanical parts related to feeding documents.
generally used after replacing or reassembling rollers and other mechanical parts related to feeding documents.
Test Item
Operation
LED (Green) on the
Operation Panel
Remarks
1. Feed
1. Turn on the scanner while pressing the "START/STOP
button" on the Operation Panel.
OFF -> Blinking
2. Release the button after LED (Green) turns off.
OFF
3. Set documents on the Feed Tray.
OFF
4. Press the "▲ of the cursor button" for 5 seconds or
more to feed the documents.
OFF
5. Paper feeding starts.
ON
6. Press the "Power button" for more than one second to
turn the unit off.
OFF
2. Shading
1. Turn on the scanner while pressing the "START/STOP
button" on the Operation Panel.
OFF -> Blinking
Before executing the
shading correction, be
sure to clean the
Scanning Glass (F),
Scanning Glass (B),
rollers, and conveyors
related to conveying
documents.
shading correction, be
sure to clean the
Scanning Glass (F),
Scanning Glass (B),
rollers, and conveyors
related to conveying
documents.
Until this process is
completed, don't stop
the process by opening
any doors or turning off
the scanner.
completed, don't stop
the process by opening
any doors or turning off
the scanner.
2. Release the button after LED (Green) status changes to
OFF.
OFF
3. Set the Shading Sheet (Part No.: PNQE1093Z-J) on the
feed tray.
OFF
4. Press the "▼of the cursor button" for 5 seconds or
more to execute the shading correction.
OFF
5. Paper feeding starts.
After ejecting the sheet, the shading data is rewritten.
Blinking
6. After the end of shading (LED (Green) turns OFF), push
the power button for more than one second to turn the
unit off.
unit off.
OFF
56
11 Troubleshooting
11.1. Troubleshooting-1 (when no error message is displayed on PC)
Symptom
Possible Cause
Recommended action
LED does not light
up.
up.
1. Power cord is not inserted correctly.
Insert the power cord correctly.
2. Cables in the scanner are not
connected properly. (especially around
Power Supply)
Power Supply)
Insert the cables properly.
3. FAN does not rotate.
1. Try to rotate the FAN, manually
2. Check the power supply to the FAN.(CN22 1st pin)
3. Replace the FAN
2. Check the power supply to the FAN.(CN22 1st pin)
3. Replace the FAN
4. Power Board does not work, properly.
1. Measure the following voltage on CONTROL Board.
CN21 4-5th pin: +24V
2. Check the connection between the Control Board and
Power Board.
3. Replace Power Board.
5. Power Switch on PANEL Board does
not work, properly.
1. Check the following connection.
(1) CN5000 (PANEL Board) and CN10 (CONTROL
Board)
(2) FFC Cable
2. Measure the following resistance value, when the power
cord is unplugged.
(1) CN5000 10th pin – GND : 0 Ω (SW5004 ON)
(2) CN5000 10th pin – GND : over 10kΩ (SW5004 OFF)
(1) CN5000 10th pin – GND : 0 Ω (SW5004 ON)
(2) CN5000 10th pin – GND : over 10kΩ (SW5004 OFF)
3. Replace SW5004 or PANEL Board.
6. Boot program of this scanner does not
work, correctly.
Replace CONTROL Board
7. DC ON/OFF circuit on CONTROL
Board does not work correctly.
1. Monitor the following signals. (when turning on the power)
(1) Q51-G : Typ. 12 V
(2) Q48-C : Typ. 11 V
(3) Q50-B : Typ. 0.6 V
(4) +7.0V (CL189) : Typ. 7V
(2) Q48-C : Typ. 11 V
(3) Q50-B : Typ. 0.6 V
(4) +7.0V (CL189) : Typ. 7V
2. Check the soldering condition of the following parts and of
their surrounding circuits on the CONTROL Board.
Q48, Q50, Q51
Q48, Q50, Q51
3. Monitor the following signals.
(1) Q48 (C-E) : Typ. 0 V
(2) Q50 (C-E) : Typ. 0 V
(2) Q50 (C-E) : Typ. 0 V
4. Replace faulty parts.
8. CONTROL Board does not work
properly.
1. Perform the "LED" test in Sec.
10.3.7.
to check the LED
ON/OFF status.
2. Check whether all connections and cables on the
CONTROL Board are normal.
3. Check the soldering condition of the following parts and of
their surrounding circuits on the CONTROL Board.
(1) +1.2V (CL196) : Typ. 1.2V
(2) +7V (CL189) : Typ. 7.0V
(3) +3.3V (CL190) : Typ. 3.3V
(4) IC9 (PF4)
(5) IC6 (Reset IC)
(1) +1.2V (CL196) : Typ. 1.2V
(2) +7V (CL189) : Typ. 7.0V
(3) +3.3V (CL190) : Typ. 3.3V
(4) IC9 (PF4)
(5) IC6 (Reset IC)
4. Check the soldering condition of the following parts on the
CONTROL Board.
(1) CN10
(1) CN10
5. Monitor the following signals.
CN10-8th pin : +3.3V
6. Replace faulty parts or CONTROL Board.
Click on the first or last page to see other KV-SL1066-M2 / KV-SL1066-U2 / KV-SL1066-B2 / KV-SL1066-K2 / KV-SL1066-C2 / KV-SL1066-CH / KV-SL1056-M2 / KV-SL1056-U2 / KV-SL1055-C2 / KV-SL1055-CH / KV-SL1036-C2 / KV-SL1055-CH / KV-SL1035-C2 / KV-SL1055-CH service manuals if exist.