• Service Manuals |
  • Panasonic |
  • Service Manual / Other |
  • KV-SL1066-M2, KV-SL1066-U2, KV-SL1066-B2, KV-SL1066-K2, KV-SL1066-C2, KV-SL1066-CH, KV-SL1056-M2, KV-SL1056-U2, KV-SL1055-C2, KV-SL1055-CH, KV-SL1036-C2, KV-SL1055-CH, KV-SL1035-C2, KV-SL1055-CH

DOWNLOAD Panasonic KV-SL1066-M2 / KV-SL1066-U2 / KV-SL1066-B2 / KV-SL1066-K2 / KV-SL1066-C2 / KV-SL1066-CH / KV-SL1056-M2 / KV-SL1056-U2 / KV-SL1055-C2 / KV-SL1055-CH / KV-SL1036-C2 / KV-SL1055-CH / KV-SL1035-C2 / KV-SL1055-CH Service Manual ↓ Size: 14.16 MB | Pages: 127 in PDF or view online for FREE

Model
KV-SL1066-M2 KV-SL1066-U2 KV-SL1066-B2 KV-SL1066-K2 KV-SL1066-C2 KV-SL1066-CH KV-SL1056-M2 KV-SL1056-U2 KV-SL1055-C2 KV-SL1055-CH KV-SL1036-C2 KV-SL1055-CH KV-SL1035-C2 KV-SL1055-CH
Pages
127
Size
14.16 MB
Type
PDF
Document
Service Manual
Brand
Device
Service Manual / Other / DOCUMENT SCANNER
File
kv-sl1066-m2-kv-sl1066-u2-kv-sl1066-b2-kv-sl1066-k.pdf
Date
PREV: Panasonic TX-24FR250 / TX-32FSR400 / TX-43FSR400 (serv.man2) Service Manual

Panasonic KV-SL1066-M2 / KV-SL1066-U2 / KV-SL1066-B2 / KV-SL1066-K2 / KV-SL1066-C2 / KV-SL1066-CH / KV-SL1056-M2 / KV-SL1056-U2 / KV-SL1055-C2 / KV-SL1055-CH / KV-SL1036-C2 / KV-SL1055-CH / KV-SL1035-C2 / KV-SL1055-CH Service Manual ▷ View online

33
8.4.
Lower Chassis 1
8.4.1.
Paper Feed Roller 
8.4.2.
CIS (F)
(1) Remove the Paper Feed Roller Assembly. 
(See Appendix 
(
Operating Manual 
P.57)
)
(2) Push the tab (arrow 
1
) to remove the Feed Roller.
(3) Remove the rollers (arrow 
2
) from the shaft.
Reassembling Note:
Make sure the left (white) and right (black) paper feed rollers 
are installed correctly.
(1) Remove the Back Cover. 
(See 8.2.5. Back Cover)
(2) Open the ADF Door.
(3) Remove screw C. 
(4) Unlock the 3 hooks.
(5) Remove the Scanning Glass (F).
(6) Take out the CIS(F) from the Main Unit.
Reassembling Note:
Pay attention to the position of the Lens Cover Sheet.
White
Black
Feed Roller
2
1
2
2
Tab
C
Scanning Glass (F)
ADF  Door
Hook
Top Front Cover
<Back Side>
Lens Cover Sheet
Reference line
Stinking position tolerance: 
                0.2 [mm] or less
<Front Side>
<Sectional View>
CIS (F)
Scanning Glass (F)
Lens Cover Sheet
34
8.4.3.
Reference Plate (B)
8.4.4.
DOOR DETECTION Board
(1) Remove the CIS (F). 
(See 8.4.2. CIS (F))
(2) Remove the Screw E.
(3) Remove the Spring.
(4) Remove the Slider in the direction of the arrows.
Reassembling Note:
(1) Slider Gear Positioning.
Move the Slider Gear to the position where the gear 
touches the rib.
(2) Slider Positioning.
Insert the Slider into the Slider groove.
With the position of the gear maintained, install the 
Slider so that the Slider touches 2 ribs.
(5) Remove the Polyslider and the Reshuffling Lever.
(6) Remove the Reference Plate (B).
(1) Remove the Back Cover. 
(See 8.2.5. Back Cover)
(2) Remove the DOOR DETECTION Board, while unlocking the 
hook.
(3) Disconnect the connector.
Rib
Slider Gear Positioning
Slider Gear
Rib
Slider Positioning
Slider
Slider groove
E Spring
Slider
Reference Plate (B)         
Reshuffling Lever
Polyslider
DOOR 
DETECTION Board
Hook
35
8.4.5.
Side Plate Assembly
8.4.6.
Conveyor Roller
(1) Remove the Back Cover. 
(See 8.2.5. Back Cover)
 
(2) Remove the screws A and the Earth Plate with the wire.
(3) Remove the 2 screws C and the Side Plate Assembly.
Reassembling Note:
a. When installing the Side-Plate Assembly, make sure to 
position the Idle Pulley of the assembly.
Assemble the pulley to outside of the Conveyor Belt 2.
b. After installing the Side-Plate Assembly, adjust the belt 
tension as follows.
(1) Loosen Spring Plate Screw. (Proper belt tension will 
be adjusted by elastic force of the spring.)
(2) Tighten the screw. (See the right illustration.)
(1) Remove the Side Plate Assembly and Conveyor Belt 2. 
(See 8.4.5. Side Plate Assembly)
(2) Pull the Pulley (arrow 
2
), while unlocking the hook (arrow 
1
) 
and remove the Pulley.
Reassembling Note:
After reassembling the Pulley, be sure to check that the 
Pulley is locked to the Conveyor Roller by pulling the Pulley.
(3) Slide and remove the bearing from the Conveyor Roller 
(arrow 
3
).
(4) Open and remove the Feed Roller Cover.
(5) Unlock the hook of the Conveyor Roller Bearing (arrow 
4
)
(6) Unlock the Conveyor Roller by turning the Conveyor Roller 
Bearing (arrow 
5
), 
(7) Slide the Conveyor Roller with the Conveyor Roller Bearing 
(arrow 
6
) and remove it (arrow 
7
).
(8) Remove the Support Bearing.
(9) Remove the Polyslider.
(10) Remove the Conveyor Roller Bearing from the Conveyor 
Roller.
Idle Pulley
Conveyor Belt 2
tension
C
A
Earth Plate
Side Plate Assembly 
C
Spring Plate Screw
Bearing
Pulley
Conveyor 
Roller
Hook
1
2
3
Feed Roller 
  Cover
Conveyor Roller
Conveyor 
Roller
Bearing
Support
 Bearing
4
6
5
7
Conveyor Roller Bearing
Support Bearing
Polyslider
36
8.4.7.
Exit Roller
(1) Remove the Side Plate Assembly 
(See 8.4.5. Side Plate 
Assembly)
 and the Conveyor Belt 2.
(2) Pull the Pulley (arrow 
2
), while unlocking the hook (arrow 
1
) 
and remove the Pulley.
Reassembling Note:
After reassembling the Pulley, be sure to check that the 
Pulley is locked to the Exit Roller by pulling the Pulley.
(3) Slide and remove the Bearing from the Exit Roller (arrow 
3
).
(4) Unlock the hook of the Conveyor Roller Bearing (arrow 
4
).
(5) Unlock the Exit Roller by turning the Conveyor Roller 
Bearing (arrow 
5
).
(6) Slide the Exit Roller with the Conveyor Roller Bearing and 
remove it (arrow 
6
).
(7) Remove the Support Bearing.
(8) Remove the Polyslider.
(9) Remove the Conveyor Roller Bearing from the Exit Roller.
Bearing
Exit Roller
Pulley
1
2
3
Hook
4
5
Exit Roller
Conveyor Roller Bearing
Support Bearing
Exit Roller
6
Conveyor Roller Bearing
Polyslider
Support Bearing
Page of 127
Display

Click on the first or last page to see other KV-SL1066-M2 / KV-SL1066-U2 / KV-SL1066-B2 / KV-SL1066-K2 / KV-SL1066-C2 / KV-SL1066-CH / KV-SL1056-M2 / KV-SL1056-U2 / KV-SL1055-C2 / KV-SL1055-CH / KV-SL1036-C2 / KV-SL1055-CH / KV-SL1035-C2 / KV-SL1055-CH service manuals if exist.

RANDOM: