Panasonic KV-SL1066-M2 / KV-SL1066-U2 / KV-SL1066-B2 / KV-SL1066-K2 / KV-SL1066-C2 / KV-SL1066-CH / KV-SL1056-M2 / KV-SL1056-U2 / KV-SL1055-C2 / KV-SL1055-CH / KV-SL1036-C2 / KV-SL1055-CH / KV-SL1035-C2 / KV-SL1055-CH Service Manual ▷ View online
29
8.3.
Upper Chassis
8.3.1.
DFP Roller
8.3.2.
PAPER SENSOR Board
8.3.3.
ULTRASONIC SENSOR (G) Board
(1) Remove the DFP Roller Assy.
(See Appendix
(
Operating Manual
P.54)
)
(2) Remove the rollers.
Reassembling Note:
Make sure to re-assemble the rollers between the ribs of the
pulleys.
pulleys.
(1) Remove Top Cover.
(See 8.2.6. Top Cover)
(2) Unlock the Hook.
(3) Remove the PAPER SENSOR Board.
(4) Disconnect the connector.
(3) Remove the PAPER SENSOR Board.
(4) Disconnect the connector.
(1) Remove Top Cover.
(See 8.2.6. Top Cover)
(2) Remove the screw B.
(3) Unlock the Hook.
(4) Remove the ULTRASONIC SENSOR (G) Board.
(5) Disconnect the connector.
(3) Unlock the Hook.
(4) Remove the ULTRASONIC SENSOR (G) Board.
(5) Disconnect the connector.
NG
Rib
Rib
Rib
Good
DFP Roller
AUTO/MANUAL DETECTION Board
ULTRASONIC SENSOR (G) Board
PAPER SENSOR Board
ULTRASONIC SENSOR (G) Board
Hook
Hook
B
PAPER SENSOR Board
30
8.3.4.
AUTO/MANUAL DETECTION Board
8.3.5.
CIS (B)
(1) Remove the Top Cover.
(See 8.2.6. Top Cover)
(2) Move the DFP Release Knob.(arrow
1
)
(3) Remove the screw B.
(4) Remove the AUTO/MANUAL DETECTION Board,
(4) Remove the AUTO/MANUAL DETECTION Board,
disconnect the connector.(arrow
2
)
Reassembling Note:
When installing the AUTO/MANUAL DETECTION board,
please be sure to insert the boss and hook.
please be sure to insert the boss and hook.
(1) Remove Top Cover.
(See 8.2.6. Top Cover)
(2) Unlock the Hook (arrow
1
), while pushing the boss of the
CIS (B) Assembly (arrow
2
).
(3) Remove CIS (B) Assembly (arrow
3
).
(4) Disconnect the FFC cable from the connector of the CIS (B).
(5) Remove the CIS Cover B with 2 CIS Springs, while releasing
(5) Remove the CIS Cover B with 2 CIS Springs, while releasing
the 9 hooks.
(6) Remove CIS (B) from Scanning Glass (B).
Boss
Hook
AUTO/MANUAL DETECTION Board
DFP Release Knob
B
Connector
AUTO/MANUAL DETECTION Board
1
2
Scanning Glass (B)
Hook
Boss of
CIS (B)
CIS (B)
1
3
2
<Back side>
CIS Cover B
Hooks
CIS Spring
CIS (B) Connector
CIS (B)
Scanning Glass (B)
31
8.3.6.
Reference Plate (B)
8.3.7.
Free Roller
(1) Remove CIS (B).
(See 8.3.5. CIS (B))
(2) Remove Lock Spring 1.
(3) Remove the polyslider and Reshuffling Lever.
(4) Remove Reference Plate from the Scanning Glass (B).
(3) Remove the polyslider and Reshuffling Lever.
(4) Remove Reference Plate from the Scanning Glass (B).
(1) Remove Top Cover.
(See 8.2.6. Top Cover)
(2) Remove 5 screws B and A.
(3) Remove the Reinforcement Plate.
(3) Remove the Reinforcement Plate.
(4) Remove 6 springs.
(5) Remove 4 Free Rollers with the shafts and the Free Roller
(5) Remove 4 Free Rollers with the shafts and the Free Roller
Guide.
(6) Remove the Free Roller from the Free Roller Sleeve.
Reassembling Note:
Install the Free Rollers with the shaft so that the D-cut of the
shaft is visible and set the Free Roller spring.
shaft is visible and set the Free Roller spring.
Reassembling Note:
Install 2 pcs of the Free Roller Guide after installing the Free
Roller as follows.
(1) Insert the tab of the Free Roller Guide under the Upper
Roller as follows.
(1) Insert the tab of the Free Roller Guide under the Upper
Frame (arrow
1
).
(2) Lock the hooks of the guide to the shaft of the roller
(arrow
2
).
Reference Plate (B)
Lock Spring 1
Scanning Glass (B)
Polyslider
Reshuffling Lever
B
Reinforcement Plate
A
<Front Side>
Free
Roller
Roller
Free
Roller
Roller
Free
Roller
Roller
Free
Roller
Roller
Free Roller
Shaft
Shaft
D-cut
Free Roller Guide
Tab
1
2
2
<Back Side>
Free Roller Spring 2
Free Roller Spring 2
Free Roller Spring
Free Roller Spring
Free Roller
Free Roller Sleeve
Free Roller
32
8.3.8.
Wiring of Upper Chassis
Click on the first or last page to see other KV-SL1066-M2 / KV-SL1066-U2 / KV-SL1066-B2 / KV-SL1066-K2 / KV-SL1066-C2 / KV-SL1066-CH / KV-SL1056-M2 / KV-SL1056-U2 / KV-SL1055-C2 / KV-SL1055-CH / KV-SL1036-C2 / KV-SL1055-CH / KV-SL1035-C2 / KV-SL1055-CH service manuals if exist.