Panasonic KV-S7065C (serv.man2) Service Manual / Supplement ▷ View online
13
4.3.4.
“Section 9.3.7 Adjust”
Note:
**
: Firmware Version 1.21 or later will enable this function. (With the Version 1.10 or older,
clicking "Feed Speed"on the main menu causes an error message.)
Remarks
(1) Parameter setting by user
(2) Status indication
(3) Parameter setting by service person
(4) Adjustment
(5) Diag.
(6) Maintenance
(1) Parameter setting by user
(2) Status indication
(3) Parameter setting by service person
(4) Adjustment
(5) Diag.
(6) Maintenance
Item
Operation
Default
Remarks
* USB ID
1. Click “USB ID” on the main menu to enter in the “USB ID”
dialog box.
2. Click “Set” on the “USB ID” dialog box to store a new ID
number for a new replaced CONTROL Board.
3. Click “Close” to get back to the main menu.
dialog box.
2. Click “Set” on the “USB ID” dialog box to store a new ID
number for a new replaced CONTROL Board.
3. Click “Close” to get back to the main menu.
—
*This setting is available only
for a new replaced
CONTROL Board.
for a new replaced
CONTROL Board.
**
Feed Speed
Feed Speed
1. Click “Feed Speed” on the main menu.
2. Change the parameter (PPS: 300 to 800).
3. Click “OK” to renew the setting, and to get
back to the main menu.
Note:
2. Change the parameter (PPS: 300 to 800).
3. Click “OK” to renew the setting, and to get
back to the main menu.
Note:
This slow thin-paper feed may reduce a
paper-jam or a double-feed.
paper-jam or a double-feed.
800
-: Decreasing the
number makes
document feed speed
slower.
number makes
document feed speed
slower.
14
15
5 “SECTION 13 SCHEMATIC DIAGRAM”
5.1.
“Section 13.2 INTERFACE Board
12
12
INTERF
A
CE Board
KV
-S7065C Ser
ies
㪥
㫆
㫋
㩷
㪤
㫆㫌㫅㫋
㪼
㪻
16
Click on the first or last page to see other KV-S7065C (serv.man2) service manuals if exist.