Panasonic KV-S5055C (serv.man4) Service Manual / Supplement ▷ View online
4
2 “SECTION 2 SPECIFICATIONS”
Item
Model No.
*1
KV-S5055C Series
Scanner
Scanning Face
Duplex
Scanning Method
CCD and LED for Front side
CCD and LED for Back side
CCD and LED for Back side
Scanning Width
305 mm (12.0 in.)
Readout Speed
*2
Black & White: 50 ppm / 100 ipm (A4, 300 dpi, Portrait)
Black & White: 70 ppm / 140 ipm (A4, 200 dpi, Portrait)
Color (JPEG): 50 ppm / 100 ipm (A4, 300 dpi, Portrait)
Color (JPEG): 70 ppm / 140 ipm (A4, 200 dpi, Portrait)
Black & White: 70 ppm / 140 ipm (A4, 200 dpi, Portrait)
Color (JPEG): 50 ppm / 100 ipm (A4, 300 dpi, Portrait)
Color (JPEG): 70 ppm / 140 ipm (A4, 200 dpi, Portrait)
Resolution
Main scanning direction: 100 - 600 dpi (1 dpi step)
Sub-scanning direction: 100 - 600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Sub-scanning direction: 100 - 600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Image Output
Binary, Grayscale, Color, MultiStream (Binary and Color, Binary and Grayscale)
Tonal Gradation
Dither (64 step gradation), Error diffusion (64 step gradation), Grayscale (8 bit), Color (24 bit)
Image Control
Image emphasis, Dynamic threshold, Automatic separation, Invert, White level from paper
Other Functions
Patch code detection (Kodak patch 2,3,T), Double feed detection
Paper
Size
48 x 70 mm (1.9 x 2.8 in.) to 297 x 432 mm (11.7 x 17 in.)
Thickness
0.04 to 0.2 mm (1.6 to 7.9 mils)
Note: 1 mil = 1 / 1000 in.
Weight
20 to 157 g/m
2
(5.3 to 41.8 lb.)
Note: 1 lb. = 3.75 g/m
2
Detection
Empty, Jam, Double-feed detection, and Bent-paper detection
Interface
USB 2.0 (Connector type: B)
Hopper Capacity
200 sheets [75 g/m
2
(20 lb.)]
Memory Size
32 MB (Standard)
Note: Additional Memory
Up to 1 GB
Unit
External Dimensions
(Width x Depth x Height)
(Width x Depth x Height)
468 x 444 x 339 mm (18.5 x 17.5 x 13.4 in.)
Weight
18 kg (40 lb.)
Power Requirement
AC 100 V to AC120 V, 50 / 60 Hz
AC 100 V to AC240 V, 50 / 60 Hz
AC 100 V to AC240 V, 50 / 60 Hz
Power
consumption
Operating
Temperature
and
Humidity
consumption
Operating
Temperature
and
Humidity
Scanning 90W or less (AC 100 V to 120 V)
85 W or less (AC220 V to 240 V)
Ready
22 W or less (AC100 V to 240 V)
Sleep
1.4 W or less (AC100 V to 240 V)
Standby
0.5 W or less (AC100 V to 240 V)
Environment Operating Temperature and
Humidity
Temperature: 15
°C to 30 °C (59 °F to 86 °F)
Humidity: 20 % to 80 %RH
Storage Temperature and
Humidity
Humidity
Temperature: 0
°C to 40 °C (32 °F to 104 °F)
Humidity: 10 % to 80 %RH
Accessories
Power cord, USB cable, Double-feed Roller Prevention Roller,Cleaning Paper, Blower,
Shading Sheet, CD-ROM (Installation Manual, Operation Manual, Device driver, ISIS, TWAIN
Image Capture Plus, Quick Scan Pro Demo, User Utility, Control Sheet, Warranty Information(U.S.A.
only)), Printed materials (Installation Manual, Safety Guide)
Shading Sheet, CD-ROM (Installation Manual, Operation Manual, Device driver, ISIS, TWAIN
Image Capture Plus, Quick Scan Pro Demo, User Utility, Control Sheet, Warranty Information(U.S.A.
only)), Printed materials (Installation Manual, Safety Guide)
PbF (Pb Free)
Applied to PCB assemblies CONTROL, DRIVE, POWER, CCD(F), CCD(B),LED, USS RELAY, USR
RELAY, USR SENSOR, SLIP DETECT SENSOR, STARTING SENSOR, USS/WAITING SENSOR,
PANEL, DFP HOME SENSOR, ENDING SENSOR, PAPER FEED SELECT SENSOR, BENT
RELAY, BENT PAPER SENSOR R(L), BENT PAPER SENSOR R(R), BENT PAPER SENSOR S(L),
and BENT PAPER SENSOR S(R) Boards
RELAY, USR SENSOR, SLIP DETECT SENSOR, STARTING SENSOR, USS/WAITING SENSOR,
PANEL, DFP HOME SENSOR, ENDING SENSOR, PAPER FEED SELECT SENSOR, BENT
RELAY, BENT PAPER SENSOR R(L), BENT PAPER SENSOR R(R), BENT PAPER SENSOR S(L),
and BENT PAPER SENSOR S(R) Boards
Note: Distinction of PbF PCB
PCBs manufactured using lead free solder will have a PbF stamp on the PCB.
Option
*3
Roller Cleaning Paper (KV-SS03)
*3
Imprinter Unit (KV-SS014)
*3
Ink Cartridge (KV-SS021)
*4
Roller Exchange Kit (KV-SS039)
Flatbed Scanner (KV-SS080)
5
Note:
*1
: KV-S5055C Series
*2
: The scanning speed depends on the test environment. In addition, it differs depending on the host computer operating
environment or applications.
*3
: KV-SSxxx (All Area except for China)
KV-SSxxx-CN (Only for China)
(xxx: 03, 014, or 021)
(xxx: 03, 014, or 021)
*4
: KV-SS039
(Except for Europe, Russia, China, and India)
KV-SS039-U (For Europe and Russia)
KV-SS039-CN (For China)
KV-SS039-CN (For China)
KV-SS039-SX (For India)
Model
Area
Serial No.
Power Cord
KV-S5055C
USA
D36 xxxx 1001
For 100 to 120 V
KV-S5055C-J
USA (made in Japan) D56 xxxx 1001
For 100 to 120 V
KV-S5055C-U
Europe, Russia
D50 xxxx 1001
For 220 to 240 V
KV-S5055C-K
Korea
D53 xxxx 1001
For 220 to 240 V
KV-S5055C-T
Taiwan
D54 xxxx 1001
For 100 to 120 V
KV-S5055C-CN
China
D57 xxxx 1001
For 220 to 240 V
KV-S5055C-B
Brasil
D52 xxxx 1001
For 220 to 240 V
KV-S5055C-SX
India
D66 xxRD xxxx
For 220 to 240 V
6
3 "SECTION 3 COMPONENT IDENTIFICATION"
3.1.
“Section 3.2 Control Panel”
Fig.3.2.1 Function of Control Panel keys and indications
Fig.3.2.2 Scanner status
Note:*
*1: Interval of blinking: ON for 1 second and OFF for 1 second
*2: Interval of blinking: ON for 1 second and OFF for 3 seconds
*3: Interval of blinking: ON for 0.25 seconds and OFF for 0.25 seconds
*4: To determine the specific condition, execute "Service Utility", and then check the status message.
*5: The scanner will enter Standby mode when no operation is performed for 30 minutes, to save power.
Push any one of the keys on the Control Panel for more than 1 second to restart the scanner.
Waiting time before the scanner enters Standby mode can be set by using Service Utility.
(The default setting value depends on the country/area.)
*2: Interval of blinking: ON for 1 second and OFF for 3 seconds
*3: Interval of blinking: ON for 0.25 seconds and OFF for 0.25 seconds
*4: To determine the specific condition, execute "Service Utility", and then check the status message.
*5: The scanner will enter Standby mode when no operation is performed for 30 minutes, to save power.
Push any one of the keys on the Control Panel for more than 1 second to restart the scanner.
Waiting time before the scanner enters Standby mode can be set by using Service Utility.
(The default setting value depends on the country/area.)
Name
Operation
Remarks
1
DFS (Double-
feed Skip) key
feed Skip) key
When a double-feed occurs, push this key to continue scanning the double-feed detected
sheet and the following sheet on the Hopper.
sheet and the following sheet on the Hopper.
2
Start/Stop key
(1) Push this key to start scanning if you set [Wait Key] to "Manual Feed Mode" in your
application software.
(2) During scanning, push this key to stop scanning.
(3) If you push this key when a double feed occurs, the sheet that was detected as a double
feed will be ejected from the scanner without being scanned. Scanning will stop.
application software.
(2) During scanning, push this key to stop scanning.
(3) If you push this key when a double feed occurs, the sheet that was detected as a double
feed will be ejected from the scanner without being scanned. Scanning will stop.
3
Ready Indicator This indicator shows the scanner status.
4
Error Indicator
This indicator lights when an error occurs.
Ready Indicator
Error Indicator
Status
(Green)
(Red)
ON
OFF
Ready
ON
Blinking (Slow, Long ON)
*1
Caution
*4
OFF
ON
Error
*4
Blinking (Slow, Long ON)
*1
OFF
Sleep
Blinking (Slow, Long ON)
*1
Blinking (Slow, Long ON)
*1
Caution
*4
/ Sleep
Blinking (Slow, Short ON)
*2
OFF
Standby
*5
Blinking (Slow, Short ON)
*2
Blinking (Slow, Long ON)
*1
Caution
*4
/ Standby
*5
Blinking (Fast)
*3
OFF
Warming up
Blinking (2 times consecutively)
OFF
Double Feed Skip mode
7
4 "SECTION 9 SERVICE UTILITY & SELF TEST"
4.1.
“Section9.1 Main Menu Indication for Service Utility”
This section describes the functions of the service utility software, such as adjustments, diagnosis, configuration and maintenance.
This utility software also includes the functions contained in the User Utility software enclosed in the scanner.
Executing “ServiceUtility.exe” will allow you to operate all the functions found in this service utility software.
Note
This utility software also includes the functions contained in the User Utility software enclosed in the scanner.
Executing “ServiceUtility.exe” will allow you to operate all the functions found in this service utility software.
Note
• This utility software is not included with the scanner. Please call service or technical support to obtain the utility
software.
• This software should be used only by an authorized service technician. Improper use of this software may cause
damage to the scanner.