Panasonic KV-S5055C (serv.man4) Service Manual / Supplement ▷ View online
13
4.3.3.
“Section 9.3.8 Other (Save Information)”
Click “Save Info” on the main menu to save the scanner and the PC information as text files.
Click “Download the latest version” to open the site for Panasonic scanner products that provides
the scanner software to be downloaded.
Click “Save Log” to open “Save As” dialog-box. Then after renaming a log file, perform “Save” to save it.
the scanner software to be downloaded.
Click “Save Log” to open “Save As” dialog-box. Then after renaming a log file, perform “Save” to save it.
14
5 "SECTION 10 TROUBLESHOOTING"
5.1.
“Section 10.3 Requirement After Parts Replacement”
Replaced circuit board assembly or part
Required adjustment
Remarks
IC0007 (Flash memory on CONTROL Board) or
CONTROL Board
CONTROL Board
1. Adjust Shading.
IC0004 (EEPROM on CONTROL Board) or CONTROL
Board
Board
1. Adjust Shading.
2. Adjust Individual position manually, as required.
3. Execute Double Feed (See 9.3.7) to adjust double
feed sensitivity.
2. Adjust Individual position manually, as required.
3. Execute Double Feed (See 9.3.7) to adjust double
feed sensitivity.
4. Execute Bent Paper Sensor (See 9.3.7.) to adjust
sensor level.
5. Set USB ID. (See 9.3.7.)
Note:
5. Set USB ID. (See 9.3.7.)
Note:
When the initial settings to this product are other than
the default (factory setting), this scanner will require
the resetting.
the default (factory setting), this scanner will require
the resetting.
(Item) (Default (Factory Setting))
Sleep Mode 15 minutes
Caution Setting (Roller Cleaning Timing) 20,000
Caution Setting (Roller Replacement Timing) 350,000
Feed Speed 100 %
Caution Setting (Roller Cleaning Timing) 20,000
Caution Setting (Roller Replacement Timing) 350,000
Feed Speed 100 %
6. In Sleep Mode, set the “Standby” condition
to “30 min.” (For KV-S5055C-U Only)
to “30 min.” (For KV-S5055C-U Only)
Starting Sensor or STARTING SENSOR Board
1. Adjust Vertical Position (for Front and Back) and
Length in individual Position or adjust All Position
Length in individual Position or adjust All Position
USS Waiting Board
1. Execute Double Feed (See 9.3.7) to adjust double
feed sensitivity.
feed sensitivity.
USR Board
1. Execute Double Feed (See 9.3.7) to adjust double
feed sensitivity.
feed sensitivity.
Optical Unit Front
1. Adjust Shading.
2. Adjust All Position or the following adjustment should
be needed.
2. Adjust All Position or the following adjustment should
be needed.
a. Adjust Front Vertical Position in Individual
Position.
b. Adjust Front Horizontal Position in Individual
Position.
Optical Unit Back
1. Adjust Shading.
2. Adjust All Position or the following adjustment should
be needed.
a. Adjust Back Vertical Position in Individual Position.
b. Adjust Back Horizontal Position in Individual
2. Adjust All Position or the following adjustment should
be needed.
a. Adjust Back Vertical Position in Individual Position.
b. Adjust Back Horizontal Position in Individual
Position.
Reference Plate (F)
1. Adjust Shading.
Reference Plate (B)
1. Adjust Shading.
Drive Roller
1. Adjust Vertical Position (for Front and Back) and
Length in individual Position or adjust All Position.
Length in individual Position or adjust All Position.
Exit Roller
1. Adjust Vertical Position (for Front and Back) and
Length in individual Position or adjust All Position
Length in individual Position or adjust All Position
Others (when assembling or disassembling parts which
will affect the scanning positions.)
will affect the scanning positions.)
1. Adjust the following adjustment or All Position.
a. Adjust Front Vertical Position in Individual
Position.
b. Adjust Front Horizontal Position in Individual
Position.
c. Adjust Back Vertical Position in Individual
Position.
d. Adjust Back Horizontal Position in Individual
Position.
BENT PAPER S(L) SENSOR Board
BENT PAPER S(R) SENSOR Board
BENT PAPER R(L) SENSOR Board
BENT PAPER R(R) SENSOR Board
BENT PAPER S(R) SENSOR Board
BENT PAPER R(L) SENSOR Board
BENT PAPER R(R) SENSOR Board
1. Execute “Bent Paper Sensor” (See 9.3.7.) to adjust
sensor level.
sensor level.
15
6 "SECTION 11 CIRCUIT DESCRIPTION"
6.1.
"Section 11.3. Explanation of Connector"
CN841 (POWER Board) - CN4003 (DRIVE Board)
Pin No.
Signal Name
Description
CN841
CN4003
1
1
OVP
Over voltage protect
2
2
12V
12V
3
3
GND
Ground
4
4
GND
Ground
5
5
GND
Ground
6
6
24V
24V
7
7
24V
24V
8
8
24V
24V
9
9
*SLEEP_PWR
Power Board
Sleep
mode
10
10
*OVP
24V Control
16
7 "SECTION12 SCHEMATIC DIAGRAM"
7.1.
"Section12.4 DRIVE Board"
7.1.1.
"Section12.4.2 DRIVE Board (Complying with ErP directive)"
10v
470u
C4030
22u
35v
C4024
22u
35v
C4021
HA17431UA-TL-E
C0DBZFA00021
IC4004
REF
1
A
2
K
3
B2P-VH-B(LF)(SN)
CN4006
1
24VSLP
2
24VIL
B11B-XH-A(LF)(SN)
CN4001
1
24VILP
2
14VSLP
3
GND
4
5VSLP
5
GND
6
GND
7
3.3VCPU
8
3.3VSLP
9
3.3VSLP
10
GND
11
GND
B10B-XASK-1(LF)(SN)
CN4003
OVP
1
12V
2
GND
3
GND
4
GND
5
24V
6
24V
7
24V
8
*SLEEP_PWR
9
OVP-
10
GND
GND
GND
GND
GND
GND
GND
+24V
+14VSLP
+24VSLP
+24VIL
DOOR_OP
3:1D
*SLEEP_AN
3:1C
*SLEEP_LOG
1:1D,3:1C
2SC2412KT146R
Q4006
DTC124EKAT146
B1GBCFLL0002
Q4004
DTC124EKAT146
Q4002
2.32k
0.5%
R4028
0
R4001
4.7k
R4006
2.2k
R4035
3.9k
R4034
750
0.5%
R4026
4.7k
R4007
+5VSLP
+3.3VSLP
+3.3VCPU
+12V
R4032
R4033
+5VD
*SLEEP_PWR
3:1C
DTA114EKAT146
Q4001
DTC124EKAT146
Q4003
+3.3VCPU
GND
1SS355TE-17
D4010
1SS355TE-17
D4008
1SS355TE-17
D4007
1SS355TE-17
D4006
100p
C4035
100p
C4034
100p
C4028
100p
C4029
MINISMDC014F-2
CF4001
4A
F4001
SLF12555T-470M1R6-PF
L4005
47u
750
0.5%
R4012
12.7k
1%
R4015
33
R4083
UDZSTE-175.1B
D4009
UDZSTE-1716B
D4011
UDZSTE-1718B
D4012
GND
SLF12565T-101M1R6-PF
L4002
100u
SLF12565T-330M2R8-PF
33u
L4001
DTA114EKAT146
Q4015
DTC124EKAT146
Q4016
+3.3VCPU
GND
750
0.5%
R4089
33
R4090
35
220u
C4002
35
220u
C4001
10v
470u
C4031
RB051L-40TE25
D4005
150
R4027
0.01u
C4019
0.01u
C4098
0.01u
C4100
1000p
C4026
1000p
C4027
1000p
C4032
1000p
C4033
RB051L-40TE25
D4018
CL4001
CL4002
CL4003
0.1u
C4017
0.1u
C4018
0.1u
C4005
0.1u
C4006
0.1u
C4003
0.1u
C4004
2SJ550STL-E
Q4005
3.92k
0.5%
R4088
35
100u
C4012
35
100u
C4014
C0DBAYY00712
IC4002
ADJ
4
SS
5
SW
2
IN
1
GND1
3
GND2
6
C0DBAYY00712
IC4012
ADJ
4
SS
5
SW
2
IN
1
GND1
3
GND2
6
4A
F4010
4A
0603FT4APCC
F4004
4A
0603FT4APCC
4A
0603FT4APCC
F4002
F4003
0603FT1APCC
F4005 1A
SI-8008TM-TL
IC4011
ADJ
4
SS
5
SW
2
IN
1
GND1
3
GND2
6
C
B
A
D
3
24
5
B
C
D
A
6
DC DC Converter
1u
C4038
1u
C4039
LED_OVR
4:5B
0.1u
C4110
GND
0.1u
C4111
GND
0.1u
C4112
0.1u
C4114
0.1u
C4115
GND
RB075B40STL
D4019
3
1
2
4A
0603FT4APCC
F4013
4A
0603FT4APCC
F4014
DTC124EKAT146
Q4024
GND
DTC124EKAT146
Q4025
GND
DTC124EKAT146
Q4026
56k
R4093
+12V
*SLEEP_LOG
1:2C,3:1C
To POWER Board
To CONTROL Board
To Door Switch
D
S
G
'10.01.20 change Cap
KV-S5055C
DRIVE Board
1
4
Note: *
N.M. means "Not Mounted".
N.M.
N.M.
N.M.
N.M.
!
!
!
!
!
!
!
F4002
Click on the first or last page to see other KV-S5055C (serv.man4) service manuals if exist.