Panasonic KV-S1025CSERIES / KV-S1020CSERIES (serv.man2) Service Manual ▷ View online
29
8 DISASSEMBLY INSTRUCTIONS
8.1.
Disassembly Flowchart
The flowchart indicates disassembly sequence of the Exterior item, Mechanical parts’ item, Unit Components’ item, and Circuit
Board assemblies’ item. When reassembling, perform the steps in the reverse order unless otherwise instructed in the
Reassembling Notes.
Board assemblies’ item. When reassembling, perform the steps in the reverse order unless otherwise instructed in the
Reassembling Notes.
Note:
Disassembly flowchart explanation
* This sample flowchart shows that, to disassemble C, procedures 1 and 2 must be performed first before proceeding
to procedure 3.
30
Note:
1. Procedures designated with an “* “ mark, are only applicable to KV-S1025C Series.
2. Before disassembling any of the above parts except for 8.2.7 and 8.2.8, perform the following steps.
(1) Unplug AC Adaptor from the scanner. (See 7.2.1.)
(2) Remove the Feed Tray and Stand. (See 4.2.)
(3) Remove the Exit Tray, extending the tips of the tray on both sides in the direction of the arrows.
2. Before disassembling any of the above parts except for 8.2.7 and 8.2.8, perform the following steps.
(1) Unplug AC Adaptor from the scanner. (See 7.2.1.)
(2) Remove the Feed Tray and Stand. (See 4.2.)
(3) Remove the Exit Tray, extending the tips of the tray on both sides in the direction of the arrows.
31
8.2.
Exterior
8.2.1.
Side Cover (R)
8.2.2.
Side Cover (L)
(1) Push "Door Open Button" to open the ADF Door.
(2) Remove the screw.
(3) Remove the Side Cover (R) by sliding the cover backward
in the direction of the arrow (1), and away from the scanner
in the direction of the arrow (2).
in the direction of the arrow (1), and away from the scanner
in the direction of the arrow (2).
(1) Push "Door Open Button" to open the ADF Door.
(See 8.2.1-(1).)
(See 8.2.1-(1).)
(2) Remove the screw.
(3) Remove the Side Cover (L) by sliding the cover backward in
the direction of the arrow (1), and away from the scanner in
the direction of the arrow (2).
the direction of the arrow (1), and away from the scanner in
the direction of the arrow (2).
32
8.2.3.
Bottom Cover
8.2.4.
Front Cover
(1) Remove the screw and the screw with spacer on the Rear
Cover.
Cover.
(2) Remove the 4 screws on the Bottom Cover.
(3) Pull out the Bottom Cover in the direction of the arrow.
(1) Remove the Side Cover (R). (See 8.2.1.)
(2) Remove the Side Cover (L). (See 8.2.2.)
(3) Remove the Bottom Cover. (See 8.2.3.)
(4) Remove the 2 screws and the Discharged Brush.
Click on the first or last page to see other KV-S1025CSERIES / KV-S1020CSERIES (serv.man2) service manuals if exist.