Panasonic EP30002KU892 / EP30002CW890 / EP30002KX890 Service Manual ▷ View online
EP30002
ORDER NO.HPD0704X10C8
-
9 -
4. ADJUSTMENT OF PRESSURE SENSOR
The adjustment of the Pressure sensor is necessary every time after the Main PCB or Massage mechanism block are
replaced or repaired disassembled & reassembled.
First, keep the Massage mechanism block unloaded without pressure and move it upward halfway.
- If the Massage mechanism block is at the highest or lowest position, you cannot arrange the pressure sensor correctly
because the fabric becomes tense with pressure.
1. Insert the Power plug into the power source and turn on the switch of the Power source switch block.
2. While pushing the buttons of Ⅰ and Ⅲ, continue to push the On/off button for more than approximately three seconds.
Then, the buttons of Ⅰ, Ⅲ, and USER A light.
3. In ten seconds after the buttons of Ⅰ, Ⅲ, and USER A light, push the buttons as follows: ①SELF PROGRAM⇒②
LEG/FOOT⇒③AUTO WIDTH⇒④START
4. Push the button of START again, then the adjustment of Pressure sensor finishes.
5. Push the button of Stop.
EP30002
ORDER NO.HPD0704X10C8
-
10 -
5. OPERATIONS OF ELECTROMAGNETIC VALVES AND AIR BAGS
Air massage operates with one Pump unit, nine 3-way electromagnetic valves, an Switch electromagnetic valve.
1. Air massage operates with the Pump and the Electromagnetic valve.
2. The Pump and all the Electromagnetic valves are OFF when the operation stops.
3. Air control stops when the Reclining lift motor and the Ottoman lift motor operate.(Electromagnetic valves are OFF in
ventilation.)
4. The Pump stops when in the On/off operation, or Electric reclining lift unit or Electric Ottoman lift unit operate in the standby
mode.(Pressure level is maintained.)
Electricity is OFF in five seconds after the Packaging mode, or the operation stop after the stop mode (Packaging mode), or
Electric reclining lift or Electric Ottoman lift are OFF in the standby
mode.
*However, the Lift motors operate controlling the air when in stretching of legs and ankles.
EP30002
ORDER NO.HPD0704X10C8
-
11 -
6. DISPLAY METHOD OF MASSAGE BLOCK TOTAL USE TIME
1. Insert the Power plug into the power source and turn on the switch of the Power source switch block.
2. While pushing the buttons of Ⅲ and Ⅳ, continue to push the On/off button for more than approximately three seconds.
Then, the button of USER D lights.
3. In ten seconds after the button of USER D lights, push the buttons as follows:①SELF PROGRAM⇒②LEG/FOOT⇒③
LOWER⇒④START
4. Push the button of Stop.
HOW TO READ THE DISPLAY OF THE ACCUMULATIVE OPERATION TIME
* Count the numbers of display as arrows.
EP30002
ORDER NO.HPD0704X10C8
-
12 -
7. DISPLAY METHOD OF EACH OPERATION USE TIME
While in the display method of Massage block total use time, push the button of START as many as you like based on what
accumulative operation use time you want to know.
*Icons are same of those of previous page.
*Push the button of Stop after checking the display.
8. METHOD OF PACKAGING POSITION SET-UP
1. Insert the Power plug to the power source and turn on the switch ON on the Power source
switch box.
2. While pushing the buttons of Ⅰand Ⅱ at the same time, push the button of On/off for
approximately three seconds. (Buttons of Ⅰ,Ⅱ, and USER C light.)
3. Push the button of Reclining up to start the Packing position set-up.
(Ottoman and Reclining lean down, and Massage mechanism block moves to the packaging position.)
(When you want to stop the operation, push the button of Stop.)
Click on the first or last page to see other EP30002KU892 / EP30002CW890 / EP30002KX890 service manuals if exist.