DOWNLOAD Panasonic EP-MA51 / EP-MA51CX800 Service Manual ↓ Size: 6.64 MB | Pages: 81 in PDF or view online for FREE

Model
EP-MA51 EP-MA51CX800
Pages
81
Size
6.64 MB
Type
PDF
Document
Service Manual
Brand
Device
Service Manual / Other / MASSAGE LOUNGER
File
ep-ma51-ep-ma51cx800.pdf
Date
PREV: Panasonic EH8467-A3 / EH8468-A3 / EH8469-A3 Service Manual

Panasonic EP-MA51 / EP-MA51CX800 Service Manual ▷ View online

EP-MA51 
ORDER NO. HPD0908A16C3
 
-
 37 - 
6.13.Removing each Lift units 
6.13.1.Removing the Ottoman lift unit 
1.Execute all the procedures of 6.8. Removing the Massage mechanism block. 
* The work would be safer and easier if the Massage 
mechanism block is completely moved to the bottom. 
2.Execute all the procedures of 6.2. Removing the Outside parts. 
3.Execute the procedures of 1-6 of 6.3. Removing the Under box, 
and disconnect the Connectors (CN107, CN201) of the Ottoman lift 
unit, which is connected to the Sub PCB. 
 
 
 
 
4.Remove the Ottoman lift pin long and the Snap pin, and then remove the Ottoman lift unit. 
* It would be easier to remove the Ottoman lift unit if the Massage mechanism block is completely moved to the 
bottom. 
 
 
EP-MA51 
ORDER NO. HPD0908A16C3
 
-
 38 - 
6.13.2. Removing the Reclining lift unit 
1.Execute all the procedures of 6.8. Removing the Massage 
mechanism block. 
* The work would be safer and easier if the Massage 
mechanism block is completely moved to the bottom. 
2.Execute all the procedures of 6.2. Removing the Outside parts. 
3.Execute the procedures 1 to 6 of 6.3. Removing the Under box, 
and disconnect   
the Connector blue (CN108, CN200) of the Reclining lift unit 
connected to the   
Sub PCB. 
 
4. Remove the Ottoman lift pin long and the Snap pin, and remove the Lift unit. 
* It would be easier to remove the Ottoman lift unit if the Massage mechanism block is completely moved to the 
bottom. 
Caution in installing 
hen installing the Snap pin, install it with the angle of 45 degree as the figure. 
 
 
 
EP-MA51 
ORDER NO. HPD0908A16C3
 
-
 39 - 
6.14. Removing the Rear frame 
1.Execute 6.2. Removing the Outside parts. 
2.Pull off three Pins, which fix the Rear frame. 
Be careful that the Rear frame falls down if Pins are pulled 
off. 
 
 
 
 
 
 
 
 
 
 
 
 
Caution in installing 
When installing the Snap pin, install it with the angle of 45 
degree as the figure. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
EP-MA51 
ORDER NO. HPD0908A16C3
 
-
 40 - 
7.  ACTUAL WIRING DIAGRAM 
7.1. Wiring diagram around Air bags 
 
 
Page of 81
Display

Click on the first or last page to see other EP-MA51 / EP-MA51CX800 service manuals if exist.

RANDOM: