Panasonic HDC-TM10PP / HDC-TM10PU / HDC-TM10EB / HDC-TM10EC / HDC-TM10EE / HDC-TM10EF / HDC-TM10EP / HDC-TM10GC / HDC-TM10GK / HDC-TM10GN / HDC-SD10PP / HDC-SD10PU / HDC-SD10EB / HDC-SD10EC / HDC-SD10EE / HDC-SD10EF / HDC-SD10EG / HDC-SD10EP / HDC-SD10GC / HDC-SD10 Service Manual ▷ View online
37
9 Measurements and Adjustments
9.1.
Electric Adjustment
• Adjustment method is different from a conventional SD video camera.
• An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment.
• A USB driver for service is necessary to communication with PC.
• Connection method of the main unit and an exclusive adjustment jig as follows
• An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment.
• A USB driver for service is necessary to communication with PC.
• Connection method of the main unit and an exclusive adjustment jig as follows
9.1.1.
Adjustment Procedure
• Connect the main unit to PC with USB.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
"TSN System".
Figure of connection
Figure of image when adjustment
Part Number of jig
• Only a necessary jig mentions it in setup of electric adjustment.
No.
Part Name
Part Number
Remarks
1
PC
------
2
AC Adaptor
------
3
DC Cable
------
4
USB Cable
------
5
30.5mm Step Up Ring
VFK1164TAR3A
6
Adjustment Software (Tatsujin)
------
38
Adjustment Items
• Adjustment item as follows.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
"TSN System".
39
10 Factory Setting
10.1. How To Turn On The Factory Settings?
1. Set the mode switch “Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual” button and “Menu” button for more than 3 seconds until the top
2. While keep pressing the “Intelligent auto” button, “Manual” button and “Menu” button for more than 3 seconds until the top
screen of the Service Mode Menu being displayed.
3. Touch the [ 1 ] of LCD.
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed on LCD monitor. Cutting of battery connection or AC power supply connection as a
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed on LCD monitor. Cutting of battery connection or AC power supply connection as a
completion of the “FACTORY SETTINGS”.
40
10.2. What Is The Factory Settings?
The factory settings clean up and/or refresh the following settings.
1. MENU, MODE, ADJUSTMENT VALUE.
2. SD card format.
3. Reset the folder number and file number of still pictures.
2. SD card format.
3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)
4. Clear the mechanism lock information.
5. Clear the service mode information contents.
6. Close the lens cover
7. Initialize the VIERA Link Physical Address.
8. Confirm the data of Built-in memory is cleared. (only HDC-TM10)
5. Clear the service mode information contents.
6. Close the lens cover
7. Initialize the VIERA Link Physical Address.
8. Confirm the data of Built-in memory is cleared. (only HDC-TM10)
• When recorded data in Built-in memory, “error display” is done
If “error display” is done, execute physical format according to the following procedure.
The setting position of factory settings:
Name
Setting position
Mode switch
OFF
Click on the first or last page to see other HDC-TM10PP / HDC-TM10PU / HDC-TM10EB / HDC-TM10EC / HDC-TM10EE / HDC-TM10EF / HDC-TM10EP / HDC-TM10GC / HDC-TM10GK / HDC-TM10GN / HDC-SD10PP / HDC-SD10PU / HDC-SD10EB / HDC-SD10EC / HDC-SD10EE / HDC-SD10EF / HDC-SD10EG / HDC-SD10EP / HDC-SD10GC / HDC-SD10 service manuals if exist.