DOWNLOAD Panasonic HC-V10EE Service Manual ↓ Size: 4.46 MB | Pages: 59 in PDF or view online for FREE

13

1. Indication method of the service menu

Set the mode switch “Recording” mode.

2. Turn the power on, and then while keep pressing the “Zoom lever” to W side, “Intelligent auto/Manual” button and “Menu” but-

ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.

• Display the camera system error cord for three histories saved in EEPROM
• The error cord contents which are displayed

Do not using service mode except above table of Service mode menu.

3. End method of the top screen of the service mode menu

Press the [MENU] button to end the service mode, and then POWER OFF.

Error code

Function

51

Focus control is abnormal

52

Zoom control is abnormal

53

OIS lens control is abnormal

Screen display

Contents

Function

1

Factory settings

Function to throw a product up in a factory shipment state
(Even if recorded data exists in the build-in memory, factory 
settings perform the initialization of build-in memory and clear 
the history data.)

4

History display

Display  accumulated  operating time, total recording time and
accumulated number of photos taken.

14

Press the “[UP] or [DOWN] of cursor” button for the item No. [4] is yellow high lighted, then press “ENTER” button to display the unit
histories.
Operation specifications

• Display the total operating time (in power on and EE state), total movie recording time and total number of photo taken. (They are

stored in EEPROM).

Press “MENU” button then return to normal recording mode.

Item

Contents

PWR

Total elapsed time

EE

Total working time of camera sensor

REC SD

Movie recorded time of inserted SD card

PICT SD

Picture recorded number of inserted SD card

REC ESD

Movie recorded time of internal memory

PICT ESD

Picture recorded number of internal memory

15

After replacing the MAIN P.C.B., be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in
“TSN system”, together with Maintenance software.

This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.

Table S1 Extension Cable List

No.

Parts No.

Connection

Form

1

VFK1978

FP6001(MAIN) - MONITOR FPC

31PIN 0.3 FFC

2

VFK1950

PP6008(MAIN) - LENS UNIT

33PIN 0.3 FFC

3

RFKZ0361

FP301(MAIN) - MOS UNIT

28PIN 0.5 FFC

4

RFKZ0379

PP6002(MAIN) - FP6701(DC BATT OP FPC)

40PIN 0.5 B to B

16

This is a disassembling chart.
When assembling, perform this chart conversely.