Panasonic DLS6 Service Manual ▷ View online
Step 3: Slide the tray in fully.
Note: Ensure the groove below the tray is aligned with the
traverse slide plate’s guide when sliding the tray in.
Note: Ensure the groove below the tray is aligned with the
traverse slide plate’s guide when sliding the tray in.
8.5.5. Assembly of clamp plate unit
Step 1: Align the clamp plate unit as shown.
Step 2: Push the clamp plate unit as arrow shown until the
catches are properly catched.
catches are properly catched.
29
DLS6
8.5.6. Assembly of traverse unit
Caution:
" Do ensure that the traverse unit is in the conditiion to be
assembled, please refer to section 8.3.1.
" Removal of the short pin is necessary for replacement
of new traverse unit.
Step 1: Release the guide.
Step 2: Push the traverse slide plate (rib), ensure both grooves
are opened.
Step 2: Push the traverse slide plate (rib), ensure both grooves
are opened.
30
DLS6
Step 3: Slot the traverse unit at approximately 45° into the
mecha chassis as arrow shown.
Note: Ensure the bosses fix exactly onto the guides.
mecha chassis as arrow shown.
Note: Ensure the bosses fix exactly onto the guides.
Step 4: Place down the traverse unit.
Step 5: Place the FFC as arrows shown.
Step 5: Place the FFC as arrows shown.
Step 6: Release the guide.
Step 7: Push the traverse slide plate (rib) to lock the traverse
unit in.
Step 7: Push the traverse slide plate (rib) to lock the traverse
unit in.
31
DLS6
9 Disassembly Flow
32
DLS6
Click on the first or last page to see other DLS6 service manuals if exist.