Panasonic DLS6 Service Manual ▷ View online
8.1. Flow Chart
8 Assembling & Disassembling
8.1.1. Disassembly flow chart
Below describes the disassembly flow for the mechanism.
17
DLS6
8.1.2. Assembly flow chart
Below describes the assembly flow for the mechanism.
18
DLS6
8.2. Preparation of Service jig
Step 1: Cut the gear out from the clamp plate unit.
Step 2: Insert the gear into the hexagonal wrench.
8.3. Checking of Mechanism unit
8.3.1. Before disassembling
Step 1: Check if the sub rack is disengaged from the traverse
slide plate before disassembly.
slide plate before disassembly.
Caution:
If it is engaged, the following steps are necessary.
19
DLS6
Step 1: Release the FFC from the slot.
Step 2: Use service jig to turn the gear counter clockwise.
Step 3: Check that the screw is in this postion then stop turning
the service jig.
Step 3: Check that the screw is in this postion then stop turning
the service jig.
Step 4: Insert the FFC behind the slot.
8.3.2. Before assembling
Step 1: Check if the sub rack is below the guide line before
assembly, otherwise the following steps are necessary.
assembly, otherwise the following steps are necessary.
20
DLS6
Click on the first or last page to see other DLS6 service manuals if exist.