Panasonic NA-106VC5WRU Service Manual ▷ View online
NA-106VC5WRU
21
10.13. Drain Pump
1. Remove clamp holding drain hose.
2. Remove clamp fixing tub outlet hose.
3. Unplug drain pump connector.
4. Remove screws holding drain pump.
10.14. Front Counterweight
1. Remove three screws on the front counterweight.
(Wrench size 13 mm).
2. Gently pull counterweight out.
10.15. Heater
1. Unplug heater connectors.
2. Remove nut (8 mm) fixing the heater.
NA-106VC5WRU
22
3. Pull heater out gently holding both sides.
10.16. Tub Bellow Seal
1. Remove the tub gasket clip by using small screwdriver.
2. Hold the tub bellows seal and gasket-body fixing spring
together, and pull them out.
10.17. Transport Screw
1. Remove four transport screws.
2. Hold the transport screw and pull it out.
10.18. Upper Counterweight
1. Remove three screws fixing the upper counterweight by
using box wrench size 13 mm.
2. Hold and carry upper-counterweight out.
NA-106VC5WRU
23
10.19. Washing Group
1. Unplug motor connectors.
2. Cut all the cable ties which fix cable group.
3. Tilt washing group forward pulling below tub.
4. Remove the washing group, removing spring hooks from
body and carrying it out through front side.
10.20. Belt
1. Remove the belt rotating the driven pulley.
10.21. Driven Pulley
1. Remove the bolt at the center of pulley by tucking a
wooden bar avoids rotation.
2. Remove pulley.
10.22. Tub Enterance, Bellow Hose
1. Remove tub inlet bellow loosening the clamp.
10.23. Motor
1. Remove two screws holding motor by using box wrench.
2. Pull motor up.
NA-106VC5WRU
24
10.24. Pressure Switch hose Group
1. Remove screw holding EPS reservoir.
2. Remove tub outlet bellowed hose loosening screwed-
clamp (Wrench size 10 mm).
10.25. Tub
1. Remove 19 screws around tub using box wrench size 8
mm.
2. Remove front tub.
10.26. Shock Absorber
1. Remove shock absorbers.
10.27. Drum
1. Remove drum
Click on the first or last page to see other NA-106VC5WRU service manuals if exist.