Panasonic UF-E1 / UF-E1CN Service Manual ▷ View online
UF-E1
25
(21) Remove TX Motor Blaket(3008).
(22) Remove Three Gears.
(22) Remove Three Gears.
(23) Remove Shaft Gear(3004).
(24) Remove Joint ADF(3005).
(25) Remove ADF Roller(3006).
(24) Remove Joint ADF(3005).
(25) Remove ADF Roller(3006).
(26) Remove the IMD Sensor(3017).
(21)
(22)
(23)
(24)
(25)
(26)
UF-E1
26
2.5.
PEN C PC Board(4002), RX M otor(4011), Speaker(6002), M icrophone(6017)
(1) Remove a connector.
(2) Two Screws(C7).
(3) Remove ASF UNIT.
(2) Two Screws(C7).
(3) Remove ASF UNIT.
(4) One Screws (1Y).
(5) Remove a cable.
(6) Remove a Flat Cable.
(7) Remove Printer Unit.
(5) Remove a cable.
(6) Remove a Flat Cable.
(7) Remove Printer Unit.
(8) Remove three connectors.
(9) Remove two Flat Cables by releasing two
(9) Remove two Flat Cables by releasing two
latches.
(10) Remove a connector.
(11) Two Screws (B2).
(12) Remove PEN C PCB(4002).
(13) Two Screws (19).
(14) Remove Printer Assy.
(14) Remove Printer Assy.
(2)
(3)
(2)
(1)
(5)
(6)
(4)
(7)
(8)
(12)
(11)
(11)
(10)
(9)
(14)
(13)
UF-E1
27
(15) Remove a Gear(4009).
(16) One Screw(19).
(17) Remove RX Motor(4011).
(16) One Screw(19).
(17) Remove RX Motor(4011).
(18) Remove a Spring(6001).
(19) Remove a Speaker(6002).
(20) Remove a Microphone(6007).
(19) Remove a Speaker(6002).
(20) Remove a Microphone(6007).
(21) Remove the Cartridge Cap and Blade.
(15)
(16)
(17)
(19)
(19)
(18)
(20)
(21)
UF-E1
28
2.6.
Cleaning Scanning Area, ADF Roller, ASF Roller
(1) Open the Panel Cover
(2) Pulling up Feed Roller Assy by holding both
(2) Pulling up Feed Roller Assy by holding both
sides tabs.
(3) Open the White Plate(2007).
(4) Clean the scanning area of CIS using soft cloth.
(4) Clean the scanning area of CIS using soft cloth.
(5) Cleaning the ADF Roller(3006) using soft cloth
soaked with ethyle alcohol.
(6) Clean the ASF Roller using soft cloth soaked
with ethyle alcohol.
(2)
(2)
(4)
(5)
(6)
Click on the first or last page to see other UF-E1 / UF-E1CN service manuals if exist.