Panasonic UF-E1 / UF-E1CN Service Manual ▷ View online
UF-E1
17
2 Disassembly Instruction
2.1.
General Disassembly Flowchart
Remove the Power Cord, Line Cable,
Handset and Recording Paper Tray.
Remove the bottom plate.
(6015)
(6015)
Remove the TX Frame.
Replace the ADF separator
Rubber.
Rubber.
Clean the ADF, Feed Roller.
Adjust the ADF pressure.
Open the Control Panel Cover.
Remove the Feed Roller Assy.
Remove the Top Cover.
Remove the Top Cover.
Remove the Power Supply
Unit.
Unit.
Remove the NCU PCB Assy.
(6013)
(6013)
Remove the CIS Assy.
Remove the Scanner Block.
Remove the Tx Motor,
ADF Roller.
ADF Roller.
Remove the ASF Unit.
Remove the Printer Unit.
Remove the DENC Motor.
(8001)
(8001)
Remove the SC PCB Assy.
(6012)
(6012)
Remove the Control Panel
Assy.
Assy.
Remove the Panel PCB Assy.
LED PCB Assy and CLD
Module.
LED PCB Assy and CLD
Module.
Remove the Printer I/F PCB
Assy. (6011)
Assy. (6011)
Remove the Catridge Cap.
(8018)
(8018)
Remove the Microphone.
(6017) and Speaker (6002).
(6017) and Speaker (6002).
Remove the Microswitch.
(7013)
(7013)
UF-E1
18
2.2.
SC PC Board(6012), NCU PC Board(6013), Printer I/F PC Board(4002)
and Power Supply PC Board(6009)
and Power Supply PC Board(6009)
(1) Disconnect the Power Cord (9008).
(2) Disconnect the Line Cord (9016).
(3) Remove the Handset (2001) and the Handset
(2) Disconnect the Line Cord (9016).
(3) Remove the Handset (2001) and the Handset
Cord (9007).
(4) Remove Recording Paper Tray (6016).
(5) Three Screws (19).
(6) Five Screws (F9).
(7) Remove bottom plate (6015).
(6) Five Screws (F9).
(7) Remove bottom plate (6015).
(8) Two Screw(1Y).
(9) Remove NCU PCB (6013).
(9) Remove NCU PCB (6013).
(10) Remove four connectors.
(1)
(3)
(2)
(4)
(6)
(6)
(6)
(5)
(5)
(7)
(9)
(9)
(8)
UF-E1
19
(11) Three Screws (1Y).
(12) Remove Power Supply Assy.
(13) Remove one connector.
(13) Remove one connector.
(14) Two Screws (36).
(15) Remove Power Supply PCB (6009).
(15) Remove Power Supply PCB (6009).
(16) Remove Printer I/F Cap.
(17) Remove Printer I/F PCB (6011).
(17) Remove Printer I/F PCB (6011).
(18) Two Screws.
(19) Remove Installation Plate (6010).
(19) Remove Installation Plate (6010).
(13)
(12)
(11)
(11)
(14)
(15)
(17)
(16)
(18)
(19)
UF-E1
20
(20) Remove five connectors.
(21) Three Screws (F9).
(22) Remove SC PCB (6012).
(21) Three Screws (F9).
(22) Remove SC PCB (6012).
(21)
(20)
(22)
(21)
(20)
Click on the first or last page to see other UF-E1 / UF-E1CN service manuals if exist.