Panasonic UF-8300 / UF-8200 / UF-7300 / UF-7200 (serv.man4) Service Manual ▷ View online
53
UF-7300/7200
UF-8300/8200
(26) Remove 1 Screw.
(27) Remove the Thermistor (1314).
(27) Remove the Thermistor (1314).
(28) Remove 4 Separator Springs (1311).
(29) Remove 4 Screws.
(30) Remove 4 Separator Plates (1312).
(31) Remove 4 Separators (1313).
(29) Remove 4 Screws.
(30) Remove 4 Separator Plates (1312).
(31) Remove 4 Separators (1313).
[2. Paper Exit Sensor]
(1) Remove the Exit Sensor PC Board (1802) by
unhooking 2 Latches as illustrated.
(2) Remove the Connector from the Exit Sensor PC
Board.
54
UF-7300/7200
UF-8300/8200
2.3.8.
Paper Feed Module
[1. Cleaning]
(1) Open the Right Cover (614).
(Refer to 2.3.1. [3.Control Panel Unit])
(2) Remove the Toner Cartridge.
<Registration Roller and Paper Feed Roller>
Clean the surface of the Rollers with a soft cloth,
saturated with water.
saturated with water.
Caution:
Do not bend the Plastic Sheet.
[2. Pick Up Roller]
(1) Remove the Rear Cover (604).
(Refer to 2.3.1. [1.Rear Cover])
(2) Open the Right Cover (614).
(Refer to 2.3.1. [3.Control Panel Unit])
(3) Pull the Paper Tray out.
(Refer to 2.3.1. [5.Front Cover Assembly])
(4) Remove the Toner Cartridge.
(5) Remove the Snap Ring.
(6) Remove the Pick Up Roller Clutch (921).
(5) Remove the Snap Ring.
(6) Remove the Pick Up Roller Clutch (921).
(7) Remove the Stopper (611) as illustrated.
(8) Remove 2 Screws.
(9) Remove the Paper Guide (1120).
(8) Remove 2 Screws.
(9) Remove the Paper Guide (1120).
(10) Turn the Pick Up Roller Assembly.
(11) Remove 2 Screws.
(12) Remove 2 Pick Up Rollers (1106).
55
UF-7300/7200
UF-8300/8200
2.3.9.
Bias Transfer Roller
2.3.10. 2nd Paper Feed Module
(1) Open the Right Cover (614).
(Refer to 2.3.1. [3.Control Panel Unit])
(2) Remove the Toner Cartridge.
(3) Remove 2 Transfer Roller Holder (901).
(4) Remove the Bias Transfer Roller Assembly.
(3) Remove 2 Transfer Roller Holder (901).
(4) Remove the Bias Transfer Roller Assembly.
(5) Remove the Spacer (902).
(6) Remove the Transfer Gear (903).
(7) Remove 2 Bushings (904).
(8) Remove the Spacer (902).
(6) Remove the Transfer Gear (903).
(7) Remove 2 Bushings (904).
(8) Remove the Spacer (902).
(1) Remove 5 Screws.
(2) Remove the Rear Cover (1501).
(2) Remove the Rear Cover (1501).
(3) Open the Jam Cover Assembly.
(4) Remove the Jam Cover Assembly by pulling the
(4) Remove the Jam Cover Assembly by pulling the
Hook as illustrated.
56
UF-7300/7200
UF-8300/8200
(5) Remove 2 Screws.
(6) Remove the Paper Guide (1120).
(6) Remove the Paper Guide (1120).
(7) Remove the Snap Ring.
(8) Remove the Pick Up Roller Clutch (1612).
(8) Remove the Pick Up Roller Clutch (1612).
(9) Turn the Pick Up Roller Assembly.
(10) Remove 2 Screws.
(11) Remove 2 Pick Up Rollers (1106).
Click on the first or last page to see other UF-8300 / UF-8200 / UF-7300 / UF-7200 (serv.man4) service manuals if exist.