Panasonic KX-FT932RU-B / KX-FT932CA-B / KX-FT932UA-B / KX-FT934RU-B / KX-FT934CA-B / KX-FT934UA-B Service Manual ▷ View online
9
KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B
4 General/Introduction
4.1.
Optional Accessories
*
1
Use only the included or specified recording paper. Using other recording paper may affect print quality and/or
cause excessive wear to the thermal head.
4.2.
Translation Lists
4.2.1.
Other
4.2.2.
Error Message (Report)
Model No.
Item
Specifications/Usage
KX-A106
Standard thermal recording paper*
1
216 mm
× 30 m roll, with 25 mm core
10
KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B
4.2.3.
Error Message (Display)
5 Features
5.1.
General
• LCD (Liquid Crystal Display) readout
Facsimile
• Automatic document feeder (10 sheets)
• Resolution: Standard/Fine/Photo/Super Fine (64 level)
• Broad cast
• Resolution: Standard/Fine/Photo/Super Fine (64 level)
• Broad cast
Integrated Telephone System
• Redialing function
• Phonebook function (100 names)
• Caller ID compatible**
• Phonebook function (100 names)
• Caller ID compatible**
**Feature requires a subscription to caller identification ser-
vices offered by certain local telephone companies for a tee.
You and your caller(s) must be in areas that provide caller
identification services, and compatible equipment must be
used by both telephone companies. Feature not available
when the unit is connected to a PBX system.
vices offered by certain local telephone companies for a tee.
You and your caller(s) must be in areas that provide caller
identification services, and compatible equipment must be
used by both telephone companies. Feature not available
when the unit is connected to a PBX system.
Enhanced Copier Function
• 64-Level halftone
11
KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B
6 Technical Descriptions
6.1.
Connection Diagram
12
KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B
6.2.
General Block Diagram
The following is an outline of each device IC on the digital board. (Refer to General Block Diagram (P.13).).
1. ASIC (IC1)
Composed mainly of an address decoder and a modem control.
Controls the general FAX operations.
Controls the operation panel I/F.
Controls the thermal head I/F and CIS I/F.
Performs the image processing.
CPU and Real time clock
Provides the reset pulse for each of the major ICs.
Controls the general FAX operations.
Controls the operation panel I/F.
Controls the thermal head I/F and CIS I/F.
Performs the image processing.
CPU and Real time clock
Provides the reset pulse for each of the major ICs.
2. Flash ROM (IC2)
Contains all of the program instructions on the unit operations.
This memory is used mainly for the parameter working in the storage area.
This memory is used mainly for the parameter working in the storage area.
3. Dynamic RAM (IC4)
This memory is used mainly for the parameter working in the storage area.
4. MODEM (IC5)
Performs the modulation and the demodulation for FAX communication.
5. Read Section
CIS image sensor to read transmitted documents.
6. Motor Driver (IC7)
Drives the transmission motor and the reception motor.
7. Thermal Head
Contains heat-emitting elements for dot matrix image printing.
8. Sensor Section
Composed of a cover open and film end switch, a document set switch, a document top switch, a paper top sensor and a
motor position switch.
motor position switch.
9. Power Supply Board Switching Section
Supplies +6V and +24V to the unit.
Click on the first or last page to see other KX-FT932RU-B / KX-FT932CA-B / KX-FT932UA-B / KX-FT934RU-B / KX-FT934CA-B / KX-FT934UA-B service manuals if exist.