Panasonic KX-FP88RS-B Service Manual ▷ View online
3.4.7.3. PRINTOUT EXAMPLE
97
KX-FP88RS-B
98
KX-FP88RS-B
3.5.
TEST FUNCTIONS
The codes listed below can be used to perform simple checks of some of the unit’s functions. When complaints are received
from customers, they provide an effective tool for identifying the locations and causes of malfunctions.
from customers, they provide an effective tool for identifying the locations and causes of malfunctions.
Test Mode
Type of Mode
Code
Function
Operation after code
input
MOTOR TEST
Service Mode
“5” “5” “6”
Rotates the transmission and reception motor to check the operation of the
motor.
13: FAX TX / Reading memory
14: Document feed
23: Recording paper is fed
33: List / FAX RX print, pull back recording paper
43: Copy
motor.
13: FAX TX / Reading memory
14: Document feed
23: Recording paper is fed
33: List / FAX RX print, pull back recording paper
43: Copy
05: Recording paper feed
(Test a recording paper feeding operation by shifting from 23 to 33).
(Test a recording paper feeding operation by shifting from 23 to 33).
Press
button to quit.
START
MODEM TEST
Service Mode
“5” “5” “4”
Telephone line circuit is connected automatically, output the following signals on
the circuit line.
1) OFF 2)14400bps 3)12000bps 4) 9600bps(U17) 5)7200bps(U17) 6)9600bps
7)7200bps 8) 4800bps 9) 2400bps 10) 300bps 11) 2100Hz 12)1100Hz
the circuit line.
1) OFF 2)14400bps 3)12000bps 4) 9600bps(U17) 5)7200bps(U17) 6)9600bps
7)7200bps 8) 4800bps 9) 2400bps 10) 300bps 11) 2100Hz 12)1100Hz
START
ROM CHECK
Service Mode
“5” “5” “1”
Indicates the version and checks the sum of the ROM.
START
SCAN CHECK
Service Mode
“5” “5” “5”
Turns on the LEDs of the CIS and operates the read systems.
START
LCD CHECK
Service Mode
“5” “5” “8”
Checks the LCD indication.
Illuminates all the dots to check if they are normal.
Illuminates all the dots to check if they are normal.
START
DTMF SINGLE TEST
Service Mode
“5” “5” “2”
Outputs the DTMF as single tones. Used to check the frequencies of the
individual DTMF tones. Refer to DTMF SINGLE TONE TRANSMIT SELECTION
(P.100).
individual DTMF tones. Refer to DTMF SINGLE TONE TRANSMIT SELECTION
(P.100).
1....ON
2....OFF
LED CHECK
Service Mode
“5” “5” “7”
All LEDs above the operation panel board flash on and off, or are illuminated.
START
KEY CHECK
Service Mode
“5” “6” “1”
Checks the button operation.
Indicates the button code on the LCD while the button is pressed. Refer to
BUTTON CODE TABLE (P.100).
Indicates the button code on the LCD while the button is pressed. Refer to
BUTTON CODE TABLE (P.100).
START (any key)
FACTORY SET
Service Mode
“5” “5” “0”
Clears the memory where the users can store data.
START
PRINT TEST
PATTERN
PATTERN
Service Mode
“8” “5” “2”
Prints out the test pattern.
Used mainly at the factory to test the print quality.
You can select 1~4. (See PRINT TEST PATTERN (P.101))
Used mainly at the factory to test the print quality.
You can select 1~4. (See PRINT TEST PATTERN (P.101))
START
DIGITAL
SPEAKERPHONE
RX & TX CHECK
SPEAKERPHONE
RX & TX CHECK
Service Mode
“8” “4” “1”
Please refer to DIGITAL SPEAKERPHONE (P.76)
SPEAKERPHONE
SENSOR CHECK &
VOX CHECK
VOX CHECK
Service Mode
“8” “1” “5”
If you enter this mode and operate sensor levers with your hands, the LCD
display of the related sensor (or switch) turns ON / OFF. Also, when copying a
document, the related sensor will turn ON / OFF. ( Do, Sn, Co, Pt, Vx)
For each sensor’s operation, refer to SENSORS AND SWITCHES(P.148).
display of the related sensor (or switch) turns ON / OFF. Also, when copying a
document, the related sensor will turn ON / OFF. ( Do, Sn, Co, Pt, Vx)
For each sensor’s operation, refer to SENSORS AND SWITCHES(P.148).
Do Sn Co Pt Vx
: LCD DISPLAY
Do: Document set sensor
:Paper inserted. Turns on when a document is inserted.
Sn: Read position sensor.
:At the read position, turns on when the front cover is opened and the
sensor lever is pressed directory.
sensor lever is pressed directory.
Co: Cover open sensor / Film end sensor
:Cover open of don’t set the film. Turns on and off when the front cover is
opened and closed.
opened and closed.
Pt: Paper top sensor
:Sensor on Turns on when the front cover is opened and the sensor lever
is pressed directly.
is pressed directly.
Vx: Vox signal
:Detection signal for the tone on the line. Turns on when there is a tone
signal on the line.
signal on the line.
START
Note:
The numbers in the boxes (XXX) indicate the keys to be input for the various test modes.
99
KX-FP88RS-B
When set to ON (=1), the 12 keys and transmission
frequencies are as shown.
frequencies are as shown.
key
High Frequency (Hz)
key
Low Frequency (Hz)
“1”
697
“5”
1209
“2”
770
“6”
1336
“3”
852
“7”
1477
“4”
941
“8”
1633
When set to OFF (=2), the 12 keys and transmission
frequencies are as shown.
frequencies are as shown.
High (Hz)
1209
1336
1477
Low (Hz)
697
697
“1”
“2”
“3”
770
“4”
“5”
“6”
852
“7”
“8”
“9”
941
“
”
“0”
“#”
3.5.1. DTMF SINGLE TONE TRANSMIT SELECTION
Note:
After performing this check, do not forget to turn the setting off.
Otherwise, dialing in DTMF signal will not work.
3.5.2. BUTTON CODE TABLE
Code
Button Name
Code
Button Name
Code
Button Name
02
RESOLUTION
25
VOLUME
3B
04
START / COPY / SET
26
VOLUME
3C
05
LOWER
31
1
3D
REDIAL / PAUSE
08
SP-PHONE
32
2
3E
FLASH
0A
MUTE
33
3
49
QUICK SCAN
0C
AUTO ANSWER
34
4
1E
EASY DIAL (FWD)
14
RECORD
35
5
1F
EASY DIAL (BACK)
16
ERASE
36
6
4A
COLLATE
18
PLAY MESSAGE
37
7
00
NO INPUT
20
MENU
38
8
01
STOP
22
HELP
39
9
24
DIRECTORY
3A
0
100
KX-FP88RS-B
Click on the first or last page to see other KX-FP88RS-B service manuals if exist.