Panasonic KX-FP88RS-B Service Manual ▷ View online
Code
Function
Set Value
Effective
Range
Default
Remarks
593
Time between CED and 300bps
1:75 msec
2:500 msec
3:1 sec
2:500 msec
3:1 sec
1~3
1
See Symptom/Countermeasure Table for long
distance and international calls in THE UNIT CAN
COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.48).
Refer to RECEIVE PROBLEM(P.47) and THE
UNIT CAN COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.48).
distance and international calls in THE UNIT CAN
COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.48).
Refer to RECEIVE PROBLEM(P.47) and THE
UNIT CAN COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.48).
594
Overseas DIS detection select
1:detects at
the 1st time
2:detects at
the 2st time
the 1st time
2:detects at
the 2st time
1, 2
1
See Symptom/Countermeasure Table for long
distance and international calls in THE UNIT CAN
COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.48).
Refer to SOMETIME THERE IS A TRANSMIT
PROBLEM(P.46) and THE UNIT CAN COPY,
BUT CANNOT EITHER TRANSMIT/RECEIVE
LONG DISTANCE OR INTERNATIONL
COMMUNICATIONS (P.48).
distance and international calls in THE UNIT CAN
COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.48).
Refer to SOMETIME THERE IS A TRANSMIT
PROBLEM(P.46) and THE UNIT CAN COPY,
BUT CANNOT EITHER TRANSMIT/RECEIVE
LONG DISTANCE OR INTERNATIONL
COMMUNICATIONS (P.48).
595
Receive error limit value set
1:5% 2:10%
3:15% 4:20%
3:15% 4:20%
1~4
2
Sets the number of acceptable error lines when
the FAX reconstructs the received data. Refer to
RECEIVE PROBLEM(P.47).
the FAX reconstructs the received data. Refer to
RECEIVE PROBLEM(P.47).
596
Transmit level set
X dBm
- 15~00
10
Selects the FAX transmission level. Refer to
SOMETIME THERE IS A TRANSMIT PROBLEM
(P.46)and RECEIVE PROBLEM (P.47).
SOMETIME THERE IS A TRANSMIT PROBLEM
(P.46)and RECEIVE PROBLEM (P.47).
598
Receiving sensitivity
43= -43 dBm
20~48
41
Used when there is an error problem. Refer to
THE UNIT CAN COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS(P.48).
THE UNIT CAN COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS(P.48).
599
ECM frame size
1:256 2:64
1, 2
1
----------
717
Transmit speed selection
1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1~6
1
Adjusts the speed to start training during FAX
transmission. Refer to SOMETIME THERE IS A
TRANSMIT PROBLEM (P.46)and THE UNIT CAN
COPY, BUT THE TRANSMISSION AND
RECEPTION IMAGE ARE INCORRECT(P.51).
transmission. Refer to SOMETIME THERE IS A
TRANSMIT PROBLEM (P.46)and THE UNIT CAN
COPY, BUT THE TRANSMISSION AND
RECEPTION IMAGE ARE INCORRECT(P.51).
718
Receive speed selection
1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1~6
1
Adjusts the speed to start training during FAX
reception. Refer to RECEIVE PROBLEM(P.47)
and THE UNIT CAN COPY, BUT THE
TRANSMISSION AND RECEPTION IMAGE ARE
INCORRECT (P.51).
reception. Refer to RECEIVE PROBLEM(P.47)
and THE UNIT CAN COPY, BUT THE
TRANSMISSION AND RECEPTION IMAGE ARE
INCORRECT (P.51).
719
Ringer off in TEL/FAX mode
1:ON 2:OFF
1, 2
1
Selects the ringer switch off when a call is
received in the TEL/FAX mode.
received in the TEL/FAX mode.
721
Pause tone detect
1:ON 2:OFF
1, 2
1
Selects the tone detection for pause in dialing.
722
Redial tone detect
1:ON 2:OFF
1, 2
1
Sets the tone detection mode after redialing.
731
CPC mode
1:A 2:B 3:OFF
1~3
1
Sets the CPC signal detection mode from the
converter.
converter.
732
AUTO disconnect cancel time
1:350 ms
2:1.8 sec
3:OFF
2:1.8 sec
3:OFF
1~3
1
“Set to “2” when the auto disconnect circuit
operates and cuts the line.”
operates and cuts the line.”
745
Power ON film feed
1:ON 2:OFF
1, 2
1
When the power is turned on, the film is wound to
take up any slack.
take up any slack.
763
CNG detect time for friendly
reception
reception
1:10 sec
2:20 sec
3:30 sec
2:20 sec
3:30 sec
1~3
3
Selects the CNG detection tone of friendly
reception.
reception.
771
T1 timer
1:35 sec
2:60 sec
2:60 sec
1, 2
1
Sets a higher value when the response from the
other party needs more time during FAX
transmission.
other party needs more time during FAX
transmission.
774
T4 timer
X 100 msec
00~99
0
Use this function when delay occurs in the line
and communication (ex. Mobile comm) does not
work well.
and communication (ex. Mobile comm) does not
work well.
775
Monitoring of message transfer
1:ON 2:OFF
1, 2
2
If set to ON a message can be monitored from
this unit’s SP-PHONE when transferring a
message.
this unit’s SP-PHONE when transferring a
message.
784
Voice prompt test
You can hear the voice prompt from speaker after
pressing “START” key.
pressing “START” key.
815
Sensor & Vox check
See TEST FUNCTIONS(P.99).
841
Digital SP-phone check
See DIGITAL SPEAKERPHONE(P.76).
852
Print test pattern
See TEST FUNCTIONS(P.99).
853
Top margin
1~9
5
----------
854
Left margin
1~8
5
----------
861
A4 size set
1:ON 2:OFF
1, 2
1
----------
870
Serial port self test
----------
89
KX-FP88RS-B
Code
Function
Set Value
Effective
Range
Default
Remarks
880
History list
See HISTORY(P.91).
881
Journal 2 list
See PRINTOUT EXAMPLE(P.97).
882
Journal 3 list
See PRINTOUT EXAMPLE(P.97).
890
TEL/FAX 1st ring back tone
1:ON 2:OFF
1, 2
1
Selects whether the TEL/FAX 1st ring back tone
is ON or OFF in the TEL/FAX mode.
is ON or OFF in the TEL/FAX mode.
895
TEL/FAX mode receiving mode
setting after bell time out
setting after bell time out
1:TAD 2:FAX
1, 2
2
FAX or TAD can be performed in a Tel/Fax mode
after the bell time you set ran out.
after the bell time you set ran out.
3.4.5. SERVICE MODE SETTINGS (Example of a printed out list)
Note:
The above values are the default values.
90
KX-FP88RS-B
3.4.6. HISTORY
Note:
See the following descriptions of this report. Item No. (1) ~ (47) are corresponding to the listed items in DESCRIPTIONS OF
THE HISTORY REPORT(P.92).
THE HISTORY REPORT(P.92).
91
KX-FP88RS-B
3.4.6.1. DESCRIPTIONS OF THE HISTORY REPORT
(1) ROM VERSION
EPROM version
(2) SUM
EPROM internal data calculation.
(3) YOUR LOGO
The user logo recorded in the unit. If it is not recorded, NONE will be displayed.
(4) YOUR TELEPHONE NUMBER
The user telephone number recorded in the unit. If it is not recorded, NONE will be displayed.
(5) FAX PAGER NUMBER
If you program a pager number into the unit, the pager number will be displayed here.
(6) FACTORY - CUSTOMER
This shows how many days from factory production until the user turns ON the unit.
(7) MONTH
The shows the very first month, date, year and time set by the user after they purchased the unit.
(8) DAY
The shows the very first month, date, year and time set by the user after they purchased the unit.
(9) YEAR
The shows the very first month, date, year and time set by the user after they purchased the unit.
(10) TIME
The shows the very first month, date, year and time set by the user after they purchased the unit.
(11) USAGE TIME
The amount of time the unit has been powered ON.
(12) FACTORY - NOW
This shows how many days from factory production until the user prints out this history list.
(13) TEL MODE
The amount of time the TEL mode setting was used.
(14) FAX MODE
The amount of time the FAX mode setting was used.
(15) TEL/FAX MODE
The amount of time the TEL/FAX mode setting was used.
(16) ANS/FAX MODE
The amount of time the ANS/FAX mode setting was used.
(17) FINAL RECEIVE MODE
The last set receiving mode by the user.
(18) TONE/PULSE SELECTION
The most recently used setting used, either TONE or PULSE.
(19) RECEIVE REDUCTION
The compression rate when receiving.
(20) SETTING NO. OF DIRECTORY
The recorded directory stations (one touch and EASY DIAL).
(21) NUMBER OF COPY
The number of pages copied.
(22) NUMBER OF RECEIVE
The number of pages received.
(23) NUMBER OF SENDING
The number of pages sent.
(24) Not Used
(25) NUMBER OF RECORDING MESSAGE
The number of messages recorded in TAM.
92
KX-FP88RS-B
Click on the first or last page to see other KX-FP88RS-B service manuals if exist.