Panasonic KX-FP363RU Service Manual ▷ View online
4.2.1. GEAR OPERATION
4.2.1.1. TRANSMIT MODE
4.2. GEAR SECTION
Once a mode is selected, the Drive Motor Gear rotates clockwise (CW) and then the controlling positions of Swing Gears A, B
and C determine which gears convey their drive power in each mode. See "Sensor Location" in SENSORS AND SWITCHES
(P.138).
and C determine which gears convey their drive power in each mode. See "Sensor Location" in SENSORS AND SWITCHES
(P.138).
The TX MOTOR rotate CCW and conveys its power to the document separation roller gear and document Exit Roller Gear.
Fig. A: Transmit mode
4.2.1.2. PAPER PICK UP AND PAPER EXIT MODE
The RX MOTOR rotate CCW and swing Gear B engages Gear C, and conveys its power to the Pickup Roller Gear.
The Swing Gear B engages Gear D, and conveys its power to the Exit Roller Gear.
Fig. B: Paper Pickup / Paper Exit mode
25
KX-FP363RU
4.2.1.3. PRINT MODE
The RX MOTOR rotate CW and Swing Gear B engages Gear F, and conveyers its power to Platen Roller Gear and Ink Film
Driver Gear.
Driver Gear.
The Swing Gear B engages Gear E, and conveys its power to the Exit Roller Gear.
Fig. C: Print mode
4.2.1.4. COPY MODE
RX side: Paper Pickup mode
→
Print mode
→
Paper Exit mode.
TX side: Transmit mode.
26
KX-FP363RU
1
Open the front cover (
) by pulling up the centre part (
).
2
Release the back cover by pushing the green button (
) on
the right side of the unit.
OR
Release the back cover by pushing the green lever (
OR
Release the back cover by pushing the green lever (
) in the
unit.
3
Open the back cover (
).
4
Remove the jammed recording paper (
).
5
Turn the gear with the blue core (
) in the direction of the
arrow.
·
Make sure that the ink film is wrapped around the blue core
(
(
) at least once.
4.3. JAMS
4.3.1. RECORDING PAPER JAMS
When the recording paper has jammed in the unit
The display will show the following.
Refer to LCD MESSAGES (P.3).
27
KX-FP363RU
6
First close the back cover securely (
) by pushing down on
the dotted area at both ends (
). Then close the front cover
securely (
).
7
Remove the recording paper and straighten. Pull the tension
plate forward (
plate forward (
) and hold open while inserting the paper.
When the recording paper was not fed into the unit
properly
properly
The display will show the following.
Refer to LCD MESSAGES (P.3).
Remove the recording paper and straighten. Pull the
tension plate (
tension plate (
) forward and hold open while inserting
paper.
Press [START] to clear the message.
4.3.2. DOCUMENT JAMS - SENDING
1
Open the front cover (
) by pulling up the centre part (
).
Remove the jammed document carefully (
).
2
Close the front cover securely (
).
Note:
·
Do not pull out the jammed paper forcibly before
opening the front cover.
opening the front cover.
28
KX-FP363RU
Click on the first or last page to see other KX-FP363RU service manuals if exist.