Panasonic KX-FP363RU Service Manual ▷ View online
1
Open the front cover (
) by pulling up the center part (
).
2
Release the back cover by pushing the green button (
) on
the right side of the unit.
OR
Release the back cover by pushing the green lever (
OR
Release the back cover by pushing the green lever (
) in the
unit.
3
Open the back cover (
).
4
Insert the gear with the blue core of the front ink film roll (
)
into the left slot of the unit (
). Insert the rear ink film roll
(
).
·
The ink film is safe to touch, and will not rub off on your
rands like carbon paper.
rands like carbon paper.
5
Turn the gear with the blue core (
) in the direction of the
arrow.
·
Make sure that the ink film is wrapped around the blue core
(
) at least once.
6
First close the back cover securely (
) by pushing down on
the dotted area at both ends (
). Then close the front cover
securely (
).
3.3.4. INSTALLING THE INK FILM
17
KX-FP363RU
3.3.5. INSTALLING THE RECORDING PAPER
A4 size recording paper can be loaded. The unit can hold up to 50 sheets of 75 g/m
2
paper. You may use 60 g/m
2
to 90 g/m
2
paper. See the note for paper specifications.
1
Before inserting a stack of paper, fan the paper to prevent paper
jams.
jams.
2
Pull the tension plate forward (
) and hold open while inserting the
paper.
·
The paper should not be over the tab (
).
·
If the paper is not inserted correctly, readjust the paper, or
the paper may jam.
the paper may jam.
18
KX-FP363RU
3.3.6. DOCUMENTS THE UNIT CAN FEED
Note:
·
Remove chips, staples or other similar fasteners.
·
Do not send the following types of documents. (Use the scanner glass for fax transmission.)
— Chemically treated paper such as carbon or carbon less duplicating paper
— Electrostatically charged paper
— Badly curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen through the other side (i.e. newspaper)
·
Check that ink, paste or correction fluid has dried completely.
·
To transmit the document with a width of less than 210 mm, we recommend using a copy machine to copy the original
document onto A4 or letter-sized paper, than transmit the copied document.
document onto A4 or letter-sized paper, than transmit the copied document.
19
KX-FP363RU
The logo can be your company, division or name.
Refer to LCD MESSAGES (P.3).
3.3.7. SETTING YOUR LOGO
To enter your logo
Pressing the [#] key will change to capital or lower-case
alternatively.
alternatively.
1.
Press [2] 2 times.
2.
Press [4] 3 times.
3.
Press [5] 3 times.
4.
Press [ ] to move the cursor to the next space and press
[5] 3 times.
[5] 3 times.
1
Press [MENU].
2
Press [ ] or [ ] until the following is displayed.
3
Press [SET].
To correct a mistake
Press [ ] or [ ] to move the cursor to the incorrect character,
and make the correction.
and make the correction.
To delete a character
Press [ ] or [ ] to move the cursor to the character you want
to delete and press [STOP].
to delete and press [STOP].
To insert a character
1.
Press [ ] or [ ] to move the cursor to the position to the
right of where you want to insert the character.
right of where you want to insert the character.
2.
Press [MUTE] to insert a space and enter the character.
4
Enter your logo, up to 30 characters.
5
Press [SET].
·
The next feature will be displayed.
6
Press [MENU] to exit the program.
Note:
·
This information will be printed on each page transmitted
from your unit.
from your unit.
20
KX-FP363RU
Click on the first or last page to see other KX-FP363RU service manuals if exist.