Panasonic KX-FLC418RU Service Manual ▷ View online
117
KX-FLC418RU
12.2.3. Communication Section
Find the problem in the table shown below, and refer to the corresponding troubleshooting procedure in Defective Facsimile
Section (P.118).
Section (P.118).
No.
Symptom
Content
Possible cause
1
The paper dose not feed properly when faxing.
(Copying is also not possible.)
(Copying is also not possible.)
Troubleshooting
Problem with the feeding mecha-
nism.
(Refer to Transmit Problem (P.118)
nism.
(Refer to Transmit Problem (P.118)
2
The fax transmits successfully one time and fails another.
(Copying is also possible.)
(Copying is also possible.)
Troubleshooting
Problem with the service line or with
the receiver's fax.
(Refer to Sometime There is a
Transmit Problem (P.119)
the receiver's fax.
(Refer to Sometime There is a
Transmit Problem (P.119)
3
The fax receives successfully one time and fails another.
(Copying is also possible.)
(Copying is also possible.)
Troubleshooting
Problem with the service line or with
the transmitter's fax.
(Refer to Receive Problem (P.120)
the transmitter's fax.
(Refer to Receive Problem (P.120)
4
The fax completely fails to transmit or receive.
(Copying is also possible.)
(Copying is also possible.)
Troubleshooting
Problem with the electric circuit.
(Refer to The Unit can copy, but
cannot Transmit / Receive (P.121)
(Refer to The Unit can copy, but
cannot Transmit / Receive (P.121)
5
The fax fails either to transmit or receive when making a
long distance or an international call.
(Copying is also possible.)
long distance or an international call.
(Copying is also possible.)
Detailed description of the
possible causes (Similar to
troubleshooting items No.2
and No.3.)
possible causes (Similar to
troubleshooting items No.2
and No.3.)
Problem with the service line.
6
The fax image is poor when transmitting or receiving during
a long distance or international call.
a long distance or international call.
7
No.1-No.5
The troubleshooting proce-
dure for each error code will
be printed on the communi-
cation result report.
dure for each error code will
be printed on the communi-
cation result report.
(Refer to Journal Report (P.105)
118
KX-FLC418RU
12.2.3.1. Defective Facsimile Section
12.2.3.1.1. Transmit Problem
CROSS REFERENCE:
Cleaning the Inside of the Unit (P.238)
ADF (Auto Document Feed) Section (P.172)
Operation Panel Section (P.125)
ADF (Auto Document Feed) Section (P.172)
Operation Panel Section (P.125)
119
KX-FLC418RU
12.2.3.1.2. Sometime There is a Transmit Problem
Note:
“596: Transmit level set” represents a service code. Refer to the Service Function Table (P.94).
“717: Transmit speed select” represents a service code. Refer to the Service Function Table (P.94).
“717: Transmit speed select” represents a service code. Refer to the Service Function Table (P.94).
120
KX-FLC418RU
12.2.3.1.3. Receive Problem
Confirm the following before starting troubleshooting.
• Is the recording paper installed properly? Refer to the next page.
Note:
“596: Transmit level set” represents a service code. Refer to the Service Function Table (P.94).
“718: Receive speed select” represents a service code. Refer to the Service Function Table (P.94).
For the receiving problem, we have thought of causes other than in the software. Some causes may be when the fax changes to
the memory receiving mode (for example, when out of paper). and the memory becomes full of the unprinted fax data. In this
case, [MEMORY FULL] and its main cause (for example, “OUT OF PAPER”) are displayed on the LCD. Accordingly, by solving
the main problem, [MEMORY FULL] can be canceled and the receiving problem can solved.
Please refer to User Recoverable Errors (P.103) for the above items.
Also, when it actually becomes a hardware deformity, please check each sensor.
“718: Receive speed select” represents a service code. Refer to the Service Function Table (P.94).
For the receiving problem, we have thought of causes other than in the software. Some causes may be when the fax changes to
the memory receiving mode (for example, when out of paper). and the memory becomes full of the unprinted fax data. In this
case, [MEMORY FULL] and its main cause (for example, “OUT OF PAPER”) are displayed on the LCD. Accordingly, by solving
the main problem, [MEMORY FULL] can be canceled and the receiving problem can solved.
Please refer to User Recoverable Errors (P.103) for the above items.
Also, when it actually becomes a hardware deformity, please check each sensor.
Click on the first or last page to see other KX-FLC418RU service manuals if exist.