Panasonic KX-FLC413UA Service Manual ▷ View online
117
KX-FLC413UA
12.2.3.1. Defective Facsimile Section
12.2.3.1.1. Transmit Problem
CROSS REFERENCE:
Cleaning the Inside of the Unit (P.236)
ADF (Auto Document Feed) Section (P.171)
Operation Panel Section (P.124)
ADF (Auto Document Feed) Section (P.171)
Operation Panel Section (P.124)
118
KX-FLC413UA
12.2.3.1.2. Sometime There is a Transmit Problem
Note:
“596: Transmit level set” represents a service code. Refer to the Service Function Table (P.93).
“717: Transmit speed select” represents a service code. Refer to the Service Function Table (P.93).
“717: Transmit speed select” represents a service code. Refer to the Service Function Table (P.93).
119
KX-FLC413UA
12.2.3.1.3. Receive Problem
Confirm the following before starting troubleshooting.
• Is the recording paper installed properly? Refer to the next page.
Note:
“596: Transmit level set” represents a service code. Refer to the Service Function Table (P.93).
“718: Receive speed select” represents a service code. Refer to the Service Function Table (P.93).
For the receiving problem, we have thought of causes other than in the software. Some causes may be when the fax changes to
the memory receiving mode (for example, when out of paper). and the memory becomes full of the unprinted fax data. In this
case, [MEMORY FULL] and its main cause (for example, “OUT OF PAPER”) are displayed on the LCD. Accordingly, by solving
the main problem, [MEMORY FULL] can be canceled and the receiving problem can solved.
Please refer to User Recoverable Errors (P.102) for the above items.
Also, when it actually becomes a hardware deformity, please check each sensor.
“718: Receive speed select” represents a service code. Refer to the Service Function Table (P.93).
For the receiving problem, we have thought of causes other than in the software. Some causes may be when the fax changes to
the memory receiving mode (for example, when out of paper). and the memory becomes full of the unprinted fax data. In this
case, [MEMORY FULL] and its main cause (for example, “OUT OF PAPER”) are displayed on the LCD. Accordingly, by solving
the main problem, [MEMORY FULL] can be canceled and the receiving problem can solved.
Please refer to User Recoverable Errors (P.102) for the above items.
Also, when it actually becomes a hardware deformity, please check each sensor.
120
KX-FLC413UA
12.2.3.1.4. The Unit can copy, but cannot Transmit / Receive
CROSS REFERENCE:
Test Functions (P.88)
Click on the first or last page to see other KX-FLC413UA service manuals if exist.