Panasonic KX-FL403UA Service Manual ▷ View online
3.3.2. PAPER STACKER
Line up the slots ( ) in the paper stacker with the pegs ( ) on the
bottom of the unit, then insert the two tabs of the paper stacker into the
slots on the unit ( ).
bottom of the unit, then insert the two tabs of the paper stacker into the
slots on the unit ( ).
Note
•
•
•
•
Do not place the unit in an area where the paper stacker may
be easily bumped into.
be easily bumped into.
•
•
•
•
Document and recording paper will be ejected from the front of
the unit. Do not place anything in front of the unit.
the unit. Do not place anything in front of the unit.
•
•
•
•
The paper stacker can hold up to approximately 30 sheets of
printed paper. Remove the printed paper before the paper
stacker becomes full.
printed paper. Remove the printed paper before the paper
stacker becomes full.
3.3.3. DOCUMENT STACKER
Insert the document stacker (
) into the slots.(
)
Note:
•
•
•
•
Make sure the document stacker is inserted completely, or the
document may jam
document may jam
3.3.4. PAPER TRAY
Insert the paper tray (
) into the slot ( ) on the back of the unit.
Note:
•
•
•
•
Do not place the unit in an area where the paper tray may be
obstructed (i.e. by a wall etc.).
obstructed (i.e. by a wall etc.).
•
•
•
•
Keep this surface (
) away from walls etc. more than 50 mm
to let the unit cool down.
17
KX-FL403UA
3.3.5. RECORDING PAPER
A4 size recording paper can be used.
The unit can hold:
— Up to 200 sheets of 60 g/m
2
to 75 g/m
2
paper.
— Up to 180 sheets of 80 g/m
2
paper.
— Up to 150 sheets of 90 g/m
2
paper.
See the note for paper specifications.
1.
Before inserting a stack of paper, fan the paper to prevent paper
jams.
jams.
2.
Pull the tension plate forward (
).
3.
Insert the paper, print-side down (
).
•
•
•
•
The paper should not be over the tab ( ).
•
•
•
•
If the paper is not inserted correctly, readjust the paper, or
the paper may jam.
the paper may jam.
18
KX-FL403UA
4.
Push the tension plate back (
).
19
KX-FL403UA
3.3.6. DOCUMENT REQUIREMENTS
Document Weight
•
•
•
•
Single sheet:45 g/m
2
to 90 g/m
2
•
•
•
•
Multiple sheet:60 g/m
2
to 80 g/m
2
Note:
•
•
•
•
Remove chips, staples or other fasteners.
•
•
•
•
Do not set the following types of documents. (Make a copy of the document and set the copy.)
— Chemically treated paper such as carbon or carbonless duplicating paper
— Electrostatically charged paper
— Badly curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen through the other side (i.e. newspaper)
•
•
•
•
Check that ink, paste or correction fluid has dried completely.
•
•
•
•
To set a document with a width of less than A4 size (210 mm), we recommend using a copy machine to copy the original
document onto A4 or letter-sized paper, then setting the copied document.
document onto A4 or letter-sized paper, then setting the copied document.
20
KX-FL403UA
Click on the first or last page to see other KX-FL403UA service manuals if exist.